ELOG DESPEC

AIDA GELINA BRIKEN nToF CRIB ISOLDE CIRCE nTOFCapture DESPEC DTAS EDI_PSA 179Ta CARME StellarModelling DCF K40

DESPEC

Fields marked with * are required
Entry time:	Sat Mar 29 11:23:49 2025
Author*:
Subject*:
> Clock status test result: Passed 12, Failed 0 > > Understand status as follows > Status bit 3 : firmware PLL that creates clocks from external clock not locked > Status bit 2 : always logic '1' > Status bit 1 : LMK3200(2) PLL and clock distribution chip not locked to external clock > Status bit 0 : LMK3200(1) PLL and clock distribution chip not locked to external clock > If all these bits are not set then the operation of the firmware is unreliable > > > Calibration test result: Passed 12, Failed 0 > > If any modules fail calibration , check the clock status and open the FADC Align and Control browser page to rerun calibration for that module > > > > Base Current Difference > aida05 fault 0xc879 : 0xc87b : 2 > aida06 fault 0x323c : 0x323e : 2 > aida07 fault 0xfb3a : 0xfb3f : 5 > aida08 fault 0xd3d6 : 0xd3d8 : 2 > White Rabbit error counter test result: Passed 8, Failed 4 > > Understand the status reports as follows:- > Status bit 3 : White Rabbit decoder detected an error in the received data > Status bit 2 : Firmware registered WR error, no reload of Timestamp > Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR > > > FPGA Timestamp error counter test result: Passed 12, Failed 0 > If any of these counts are reported as in error > The ASIC readout system has detected a timeslip. > That is the timestamp read from the time FIFO is not younger than the last > > > > Returned 0 0 0 0 0 0 0 0 0 0 0 0 > Mem(KB) : 4 8 16 32 64 128 256 512 1k 2k 4k > aida01 : 23 10 3 1 1 2 1 3 3 3 6 : 36156 > aida02 : 25 10 4 3 1 2 2 3 3 3 6 : 36500 > aida03 : 27 8 5 2 3 4 3 3 2 3 6 : 36092 > aida04 : 30 4 4 5 0 2 4 2 3 3 6 : 36472 > aida05 : 19 5 7 1 3 2 2 2 2 4 6 : 37060 > aida06 : 18 13 1 2 1 3 2 3 3 3 6 : 36544 > aida07 : 24 7 3 2 2 3 1 3 2 4 6 : 37384 > aida08 : 15 11 2 5 2 4 1 4 3 3 6 : 37076 > aida09 : 7 3 4 1 5 6 5 4 3 2 6 : 36308 > aida10 : 8 3 13 4 3 3 1 4 2 3 6 : 36040 > aida11 : 18 11 17 7 4 4 4 3 2 3 6 : 36752 > aida12 : 12 7 7 7 4 4 2 3 2 3 6 : 36024 > > > > Collecting the file size of each FEE64 Options CONTENTS file to check they are all the same > > FEE : aida01 => Options file size is 1025 Last changed Fri Apr 16 01:00:12 CEST 2021 > FEE : aida02 => Options file size is 1014 Last changed Fri Apr 16 00:56:20 CEST 2021 > FEE : aida03 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 > FEE : aida04 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 > FEE : aida05 => Options file size is 1025 Last changed Fri Apr 16 00:53:25 CEST 2021 > FEE : aida06 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 > FEE : aida07 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 > FEE : aida08 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 > FEE : aida09 => Options file size is 1014 Last changed Wed Apr 14 21:52:05 CEST 2021 > FEE : aida10 => Options file size is 1014 Last changed Wed Apr 14 21:52:06 CEST 2021 > FEE : aida11 => Options file size is 1014 Last changed Wed Apr 14 21:52:05 CEST 2021 > FEE : aida12 => Options file size is 1025 Last changed Wed Apr 14 21:58:54 CEST 2021 > > > > 17:27. Checked system stats, temps, leakage etc. looks ok > > > 18:49. Tape server writing to disk /NULL/R21_9+ > /TapeData points to /media/SecondDrive/ - 3.6Tb free > > 19.15. checks > > Clock status test result: Passed 12, Failed 0 > > Understand status as follows > Status bit 3 : firmware PLL that creates clocks from external clock not locked > Status bit 2 : always logic '1' > Status bit 1 : LMK3200(2) PLL and clock distribution chip not locked to external clock > Status bit 0 : LMK3200(1) PLL and clock distribution chip not locked to external clock > If all these bits are not set then the operation of the firmware is unreliable > > > Calibration test result: Passed 12, Failed 0 > > If any modules fail calibration , check the clock status and open the FADC Align and Control browser page to rerun calibration for that module > > > Base Current Difference > aida05 fault 0xc879 : 0xc87b : 2 > aida06 fault 0x323c : 0x323e : 2 > aida07 fault 0xfb3a : 0xfb3f : 5 > aida08 fault 0xd3d6 : 0xd3d8 : 2 > White Rabbit error counter test result: Passed 8, Failed 4 > > Understand the status reports as follows:- > Status bit 3 : White Rabbit decoder detected an error in the received data > Status bit 2 : Firmware registered WR error, no reload of Timestamp > Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR > > > Base Current Difference > aida07 fault 0xf : 0x10 : 1 > FPGA Timestamp error counter test result: Passed 11, Failed 1 > If any of these counts are reported as in error > The ASIC readout system has detected a timeslip. > That is the timestamp read from the time FIFO is not younger than the last > > > Returned 0 0 0 0 0 0 0 0 0 0 0 0 > Mem(KB) : 4 8 16 32 64 128 256 512 1k 2k 4k > aida01 : 16 9 16 2 2 2 1 3 3 3 6 : 36424 > aida02 : 1 3 5 4 1 3 3 2 3 3 6 : 36268 > aida03 : 24 13 11 6 3 3 2 4 2 3 6 : 36472 > aida04 : 5 4 4 4 3 3 3 2 3 3 6 : 36404 > aida05 : 17 8 4 2 2 2 2 2 2 4 6 : 36996 > aida06 : 26 11 3 2 0 3 2 3 3 3 6 : 36528 > aida07 : 24 7 2 1 1 1 2 3 2 4 6 : 37272 > aida08 : 13 12 6 3 3 4 1 4 3 3 6 : 37140 > aida09 : 22 15 19 2 6 5 4 4 3 2 6 : 36416 > aida10 : 16 11 6 4 3 3 1 4 2 3 6 : 36024 > aida11 : 12 4 5 4 2 3 3 3 2 3 6 : 35872 > aida12 : 18 12 9 4 4 4 2 3 2 3 6 : 36024 > > > > Collecting the file size of each FEE64 Options CONTENTS file to check they are all the same > > FEE : aida01 => Options file size is 1025 Last changed Fri Apr 16 01:00:12 CEST 2021 > FEE : aida02 => Options file size is 1014 Last changed Fri Apr 16 00:56:20 CEST 2021 > FEE : aida03 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 > FEE : aida04 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 > FEE : aida05 => Options file size is 1025 Last changed Fri Apr 16 00:53:25 CEST 2021 > FEE : aida06 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 > FEE : aida07 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 > FEE : aida08 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 > FEE : aida09 => Options file size is 1014 Last changed Wed Apr 14 21:52:05 CEST 2021 > FEE : aida10 => Options file size is 1014 Last changed Wed Apr 14 21:52:06 CEST 2021 > FEE : aida11 => Options file size is 1014 Last changed Wed Apr 14 21:52:05 CEST 2021 > FEE : aida12 => Options file size is 1025 Last changed Wed Apr 14 21:58:54 CEST 2021 > > > 19.53. Checked system stats, temps, leakage etc. looks ok > > 20:30. Checked system stats, temps, leakage etc. looks ok > > 20:59. Checked system stats, temps, leakage etc. looks ok > > > > 21:31 System checks > > Clock status test result: Passed 12, Failed 0 > > Understand status as follows > Status bit 3 : firmware PLL that creates clocks from external clock not locked > Status bit 2 : always logic '1' > Status bit 1 : LMK3200(2) PLL and clock distribution chip not locked to external clock > Status bit 0 : LMK3200(1) PLL and clock distribution chip not locked to external clock > If all these bits are not set then the operation of the firmware is unreliable > > Calibration test result: Passed 12, Failed 0 > > If any modules fail calibration , check the clock status and open the FADC Align and Control browser page to rerun calibration for that module > > > > Base Current Difference > aida05 fault 0xc879 : 0xc87b : 2 > aida06 fault 0x323c : 0x323e : 2 > aida07 fault 0xfb3a : 0xfb40 : 6 > aida08 fault 0xd3d6 : 0xd3d8 : 2 > White Rabbit error counter test result: Passed 8, Failed 4 > > Understand the status reports as follows:- > Status bit 3 : White Rabbit decoder detected an error in the received data > Status bit 2 : Firmware registered WR error, no reload of Timestamp > Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR > > > Base Current Difference > aida07 fault 0xf : 0x10 : 1 > FPGA Timestamp error counter test result: Passed 11, Failed 1 > If any of these counts are reported as in error > The ASIC readout system has detected a timeslip. > That is the timestamp read from the time FIFO is not younger than the last > > > Returned 0 0 0 0 0 0 0 0 0 0 0 0 > Mem(KB) : 4 8 16 32 64 128 256 512 1k 2k 4k > aida01 : 21 9 17 3 2 2 1 3 3 3 6 : 36492 > aida02 : 5 1 1 6 0 2 2 3 3 3 6 : 36332 > aida03 : 2 10 11 6 4 4 3 3 2 3 6 : 36296 > aida04 : 27 12 3 4 0 2 3 2 3 3 6 : 36220 > aida05 : 19 9 7 2 1 2 2 2 2 4 6 : 36996 > aida06 : 28 5 0 4 0 3 1 3 3 3 6 : 36248 > aida07 : 19 13 10 6 2 2 1 3 2 4 6 : 37524 > aida08 : 18 9 6 0 1 4 1 3 3 3 6 : 36400 > aida09 : 17 19 12 3 6 5 4 4 3 2 6 : 36348 > aida10 : 23 9 7 4 2 3 1 4 2 3 6 : 35988 > aida11 : 19 10 3 3 2 3 3 3 2 3 6 : 35884 > aida12 : 12 6 0 3 2 4 2 3 2 3 6 : 35648 > > > > Collecting the file size of each FEE64 Options CONTENTS file to check they are all the same > > FEE : aida01 => Options file size is 1025 Last changed Fri Apr 16 01:00:12 CEST 2021 > FEE : aida02 => Options file size is 1014 Last changed Fri Apr 16 00:56:20 CEST 2021 > FEE : aida03 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 > FEE : aida04 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 > FEE : aida05 => Options file size is 1025 Last changed Fri Apr 16 00:53:25 CEST 2021 > FEE : aida06 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 > FEE : aida07 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 > FEE : aida08 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 > FEE : aida09 => Options file size is 1014 Last changed Wed Apr 14 21:52:05 CEST 2021 > FEE : aida10 => Options file size is 1014 Last changed Wed Apr 14 21:52:06 CEST 2021 > FEE : aida11 => Options file size is 1014 Last changed Wed Apr 14 21:52:05 CEST 2021 > FEE : aida12 => Options file size is 1025 Last changed Wed Apr 14 21:58:54 CEST 2021 > > > 22.06. Checked system stats, temps, leakage etc. looks ok > > 22.18CEST BNC PB-5 amplitude changed from 1V to 2V > fioler NULL/R21_67 > > 22.23CEST All histograms zero'd > > 22.43. Checked system stats, temps, leakage etc. looks ok > 23.21. Checked system stats, temps, leakage etc. looks ok > > > 23.46 system checks > Clock status test result: Passed 12, Failed 0 > > Understand status as follows > Status bit 3 : firmware PLL that creates clocks from external clock not locked > Status bit 2 : always logic '1' > Status bit 1 : LMK3200(2) PLL and clock distribution chip not locked to external clock > Status bit 0 : LMK3200(1) PLL and clock distribution chip not locked to external clock > If all these bits are not set then the operation of the firmware is unreliable > > > Calibration test result: Passed 12, Failed 0 > > If any modules fail calibration , check the clock status and open the FADC Align and Control browser page to rerun calibration for that module > > > Base Current Difference > aida05 fault 0xc879 : 0xc87b : 2 > aida06 fault 0x323c : 0x323e : 2 > aida07 fault 0xfb3a : 0xfb40 : 6 > aida08 fault 0xd3d6 : 0xd3d8 : 2 > White Rabbit error counter test result: Passed 8, Failed 4 > > Understand the status reports as follows:- > Status bit 3 : White Rabbit decoder detected an error in the received data > Status bit 2 : Firmware registered WR error, no reload of Timestamp > Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR > > Base Current Difference > aida07 fault 0xf : 0x10 : 1 > FPGA Timestamp error counter test result: Passed 11, Failed 1 > If any of these counts are reported as in error > The ASIC readout system has detected a timeslip. > That is the timestamp read from the time FIFO is not younger than the last > > > Returned 0 0 0 0 0 0 0 0 0 0 0 0 > Mem(KB) : 4 8 16 32 64 128 256 512 1k 2k 4k > aida01 : 17 12 7 0 3 3 2 4 2 3 6 : 36180 > aida02 : 35 3 5 2 0 2 1 3 3 3 6 : 36148 > aida03 : 22 6 10 2 1 3 2 4 2 3 6 : 36136 > aida04 : 27 9 3 5 2 4 3 3 2 3 6 : 36100 > aida05 : 20 9 3 3 2 2 2 2 2 4 6 : 37032 > aida06 : 25 11 1 2 0 3 1 3 3 3 6 : 36236 > aida07 : 20 6 6 2 3 3 2 4 1 4 6 : 37216 > aida08 : 25 10 0 2 1 3 1 3 3 3 6 : 36276 > aida09 : 10 4 3 4 4 5 4 4 3 2 6 : 35960 > aida10 : 26 9 3 0 1 3 1 4 2 3 6 : 35744 > aida11 : 2 3 4 2 2 3 3 3 2 3 6 : 35744 > aida12 : 4 9 7 2 2 4 2 3 2 3 6 : 35720 > > Collecting the file size of each FEE64 Options CONTENTS file to check they are all the same > > FEE : aida01 => Options file size is 1025 Last changed Fri Apr 16 01:00:12 CEST 2021 > FEE : aida02 => Options file size is 1014 Last changed Fri Apr 16 00:56:20 CEST 2021 > FEE : aida03 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 > FEE : aida04 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 > FEE : aida05 => Options file size is 1025 Last changed Fri Apr 16 00:53:25 CEST 2021 > FEE : aida06 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 > FEE : aida07 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 > FEE : aida08 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 > FEE : aida09 => Options file size is 1014 Last changed Wed Apr 14 21:52:05 CEST 2021 > FEE : aida10 => Options file size is 1014 Last changed Wed Apr 14 21:52:06 CEST 2021 > FEE : aida11 => Options file size is 1014 Last changed Wed Apr 14 21:52:05 CEST 2021 > FEE : aida12 => Options file size is 1025 Last changed Wed Apr 14 21:58:54 CEST 2021 Encoding: HTML ELCode plain Suppress Email notification

Attachment 1:
Drop attachments here...

ELOG V3.1.4-unknown