AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
DESPEC
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Apr 17 11:27:38 2021
Author
*
:
Subject
*
:
Base Current Difference aida05 fault 0x1a52 : 0x1a53 : 1 aida06 fault 0x4f3e : 0x4f3f : 1 aida07 fault 0x3bcd : 0x3bce : 1 aida08 fault 0xc7c7 : 0xc7c8 : 1 White Rabbit error counter test result: Passed 8, Failed 4 Understand the status reports as follows:- Status bit 3 : White Rabbit decoder detected an error in the received data Status bit 2 : Firmware registered WR error, no reload of Timestamp Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR 13:55 CEST Statistics : ok elog:234/4 Temp : ok elog:234/5 Bias : ok elog:234/6 ucesb : ok DB: No faults found ADC Calibration check: FEE64 module aida06 failed FEE64 module aida07 failed FEE64 module aida10 failed Calibration test result: Passed 9, Failed 3 If any modules fail calibration , check the clock status and open the FADC Align and Control browser page to rerun calibration for that module White Rabbit Check: Base Current Difference aida05 fault 0x1a52 : 0x1a53 : 1 aida06 fault 0x4f3e : 0x4f3f : 1 aida07 fault 0x3bcd : 0x3bcf : 2 aida08 fault 0xc7c7 : 0xc7c8 : 1 White Rabbit error counter test result: Passed 8, Failed 4 FPGA check: Base Current Difference aida09 fault 0x0 : 0x1 : 1 aida12 fault 0x0 : 0x2 : 2 FPGA Timestamp error counter test result: Passed 10, Failed 2 If any of these counts are reported as in error The ASIC readout system has detected a timeslip. That is the timestamp read from the time FIFO is not younger than the last 14:05 no beam 14:10 beam back 14:15 no beam, beam current being optimised, going to thicker degrader when beam returns 14:37 CEST Statistics : ok Temp : ok Bias : ok (ch3 now over 6uA) ucesb : ok DB: No faults found 15:03 CEST Statistics : ok Temp : ok Bias : ok ucesb : ok DB: No faults found 15:31 CEST Statistics : ok Temp : ok Bias : ok ucesb : ok DB: No faults found 15:50 Statistics : ok elog:234/7 Temp : ok elog:234/8 Bias : ok elog:234/9 ucesb : ok elog:234/10 DB: No faults found ADC Calibration check: FEE64 module aida06 failed FEE64 module aida07 failed FEE64 module aida10 failed Calibration test result: Passed 9, Failed 3 If any modules fail calibration , check the clock status and open the FADC Align and Control browser page to rerun calibration for that module White Rabbit Check: Base Current Difference aida05 fault 0x1a52 : 0x1a53 : 1 aida06 fault 0x4f3e : 0x4f3f : 1 aida07 fault 0x3bcd : 0x3bcf : 2 aida08 fault 0xc7c7 : 0xc7c8 : 1 White Rabbit error counter test result: Passed 8, Failed 4 Understand the status reports as follows:- Status bit 3 : White Rabbit decoder detected an error in the received data Status bit 2 : Firmware registered WR error, no reload of Timestamp Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR FPGA check: Base Current Difference aida09 fault 0x0 : 0x1 : 1 aida12 fault 0x0 : 0x2 : 2 FPGA Timestamp error counter test result: Passed 10, Failed 2 If any of these counts are reported as in error The ASIC readout system has detected a timeslip. That is the timestamp read from the time FIFO is not younger than the last
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Resubmit as new entry
Attachment 1:
30.png
Original size: 502x344
Attachment 2:
Screenshot_2021-04-17_Statistics_aidas-gsi(3).png
Original size: 2144x1035
Attachment 3:
Screenshot_2021-04-17_Temperature_and_status_scan_aidas-gsi(3).png
Original size: 2144x1035
Attachment 4:
Screenshot_2021-04-17_Statistics_aidas-gsi.png
Original size: 2144x1035
Attachment 5:
Screenshot_2021-04-17_Temperature_and_status_scan_aidas-gsi.png
Original size: 2144x1035
Attachment 6:
31.png
Original size: 502x344
Attachment 7:
Screenshot_2021-04-17_Statistics_aidas-gsi(1).png
Original size: 2144x1035
Attachment 8:
Screenshot_2021-04-17_Temperature_and_status_scan_aidas-gsi(1).png
Original size: 2144x1035
Attachment 9:
32.png
Original size: 502x344
Attachment 10:
33.png
Original size: 1168x216
Attachment 11:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown