AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
DESPEC
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 11:27:17 2025
Author
*
:
Subject
*
:
> 08:09 DAQ crashes at start of shift (!) > > again happens at same time as beam being lost > > All FEE64 lost connection > > Beam downtime for next 3-4 hours > > Performed powercycle and reset > > 08:40 AIDA back up and running, writing to R36 > > 08:42 *all* system wide checks ok > > temperatures ok - attachment 1 > > statistics ok - attachment 2 > > detector bias/leakage currents ok - attachment 3 > > 08:57 options file size check; > > > Collecting the file size of each FEE64 Options CONTENTS file to check they are all the same > > FEE : aida01 => Options file size is 1025 Last changed Tue Apr 20 08:22:14 CEST 2021 > FEE : aida02 => Options file size is 1014 Last changed Fri Apr 16 00:56:20 CEST 2021 > FEE : aida03 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 > FEE : aida04 => Options file size is 1025 Last changed Sat Apr 17 06:07:36 CEST 2021 > FEE : aida05 => Options file size is 1025 Last changed Fri Apr 16 00:53:25 CEST 2021 > FEE : aida06 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 > FEE : aida07 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 > FEE : aida08 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 > FEE : aida09 => Options file size is 1014 Last changed Wed Apr 14 21:52:05 CEST 2021 > FEE : aida10 => Options file size is 1014 Last changed Wed Apr 14 21:52:06 CEST 2021 > FEE : aida11 => Options file size is 1014 Last changed Wed Apr 14 21:52:05 CEST 2021 > FEE : aida12 => Options file size is 1025 Last changed Mon Apr 19 09:05:25 CEST 2021 > > 08:59 no error messages in database check terminal > stats ok > > 09:16 waveforms - attachments 4 & 5 > > 09:30 no error messages in database check terminal > stats ok > > 10:07 no error messages in database check terminal > stats ok > > 10:30 aida01, aida02, aida03, aida04, aida07 lost connection, DAQ crashes > > powercycle attempted, but FEE modules remain unconnected > > TD performs further power cycle > > 11.12 reboot aida05 > > DAQ reset/setup > > system wide checks > > sync asic clocks OK > clock status & fpga timestamp errors OK > > WR decoder status > > Base Current Difference > aida09 fault 0xb307 : 0xb307 : 0 > aida09 : WR status 0x40 > aida10 fault 0x3d6c : 0x3d6c : 0 > aida10 : WR status 0x40 > aida11 fault 0xa610 : 0xa610 : 0 > aida11 : WR status 0x40 > aida12 fault 0x7c7 : 0x7c7 : 0 > aida12 : WR status 0x40 > White Rabbit error counter test result: Passed 8, Failed 4 > > Understand the status reports as follows:- > Status bit 3 : White Rabbit decoder detected an error in the received data > Status bit 2 : Firmware registered WR error, no reload of Timestamp > Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR > > NH had access to area, unplugged and replugged HDMI cables from aida09, aida10, aida11, aida12 root to MACB (at both ends) > > earlier on, Akash secured HDMI cable to aida07 > > 11:55 AIDA powercycle and reset, DAQ ok now > > writing to file NULL/R45 > > 12:00 CB takes over
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown