<p>Quick system checks after crash</p>
<p>Temperature ok.</p>
<p>Still cannot connect remotely to /ucesb with my gsi web login and password (?).</p>
<p> </p>
<p>Clock status test result: Passed 12, Failed 0</p>
<p>Understand status as follows<br />
Status bit 3 : firmware PLL that creates clocks from external clock not locked<br />
Status bit 2 : always logic '1'<br />
Status bit 1 : LMK3200(2) PLL and clock distribution chip not locked to external clock<br />
Status bit 0 : LMK3200(1) PLL and clock distribution chip not locked to external clock<br />
If all these bits are not set then the operation of the firmware is unreliable</p>
<p><br />
Calibration test result: Passed 12, Failed 0</p>
<p>If any modules fail calibration , check the clock status and open the FADC Align and Control browser page to rerun calibration for that module</p>
<p> Base Current Difference<br />
aida05 fault 0x31a2 : 0x31a2 : 0 <br />
aida05 : WR status 0x10<br />
White Rabbit error counter test result: Passed 11, Failed 1</p>
<p>Understand the status reports as follows:-<br />
Status bit 3 : White Rabbit decoder detected an error in the received data<br />
Status bit 2 : Firmware registered WR error, no reload of Timestamp<br />
Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR</p>
<p>Returned 0 0 0 0 0 0 0 0 0 0 0 0 <br />
Mem(KB) : 4 8 16 32 64 128 256 512 1k 2k 4k<br />
aida01 : 9 3 4 2 3 2 1 4 2 3 7 : 39804<br />
aida02 : 29 4 2 3 0 3 1 4 2 3 7 : 39828<br />
aida03 : 20 6 1 2 2 3 1 4 2 3 7 : 39888<br />
aida04 : 19 5 4 2 1 3 1 4 2 3 7 : 39860<br />
aida05 : 27 5 4 1 2 3 2 3 1 4 7 : 40692<br />
aida06 : 17 10 3 2 1 3 1 4 2 3 7 : 39876<br />
aida07 : 22 7 2 2 2 3 1 4 2 3 7 : 39920<br />
aida08 : 12 6 5 1 3 2 1 4 2 3 7 : 39824<br />
aida09 : 0 9 1 3 1 3 1 4 2 3 7 : 39800<br />
aida10 : 2 2 2 3 3 2 3 2 2 3 7 : 39256<br />
aida11 : 21 7 4 3 0 3 2 3 2 3 7 : 39596<br />
aida12 : 18 8 3 0 2 3 2 3 2 3 7 : 39608</p>
<p> </p> |