AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
DESPEC
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 11:29:13 2025
Author
*
:
Subject
*
:
> > From ttyUSB7 system console log > > 20/09:59:30|get_ASICBlk : Blk=1 : bytes = 793600 : Blk_Status = 00000088 : Offset = 00100000 : Databuffer : 273090556 : 0 => C0017F1D : 1 => 0FAC4BAF > 20/09:59:31|Last Data : Databuffer 273884152 : 0 => 80426EF4 : 1 => 0BD70000 > 20/09:59:31| C03E7F21 : 03FCCB77 | C03D7EF5 : 03FCEE9F | C0047DA3 : 03FCF5A7 | C0207E21 : 03FCF5A7 > 20/09:59:31| C0317E77 : 03FCF5A7 | C0087E6D : 03FCF66F | C0107E98 : 03FCF66F | C0217ED8 : 03FCF66F > 20/09:59:31| C0327E19 : 03FCF66F | C00B7DF0 : 03FCF737 | C0117DD5 : 03FCF737 | C0227F27 : 03FCF737 > 20/09:59:31| C03C7F23 : 03FCF737 | C0137EF9 : 03FCF7FF | C0297EB7 : 03FCF7FF | C03E7EC7 : 03FCF7FF > 20/09:59:31| C0167DFE : 03FCF8C7 | C02A7FC3 : 03FCF8C7 | C03F7E82 : 03FCF8C7 | C01B7E91 : 03FCF98F > 20/09:59:31| C02F7E8F : 03FCF98F | C01D7DC4 : 03FCFA57 | C01E7D40 : 03FCFB1F | 80426EF3 : 03FD0000 > 20/09:59:32| 8050023F : 03FD0000 | C03D7F1A : 03FD303F | 80426EF3 : 03FD4000 | 8050023F : 03FD4000 > 20/09:59:32| C0317F2F : 03FD5047 | C0047DF2 : 03FD510F | C01B7EAD : 03FD54F7 | C03D7F09 : 03FD5D8F > 20/09:59:32|SIGPIPE ERROR - Error in xfer ASIC procedures: location=0 > 20/10:00:37|xfer_block busy > 20/10:00:37|xfer_block busy > 20/10:00:37|xfer_block busy > 20/10:00:37|xfer_block busy > 20/10:00:37|xfer_block busy > 20/10:00:37|xfer_block busy > 20/10:00:37|xfer_block busy > 20/10:00:37|xfer_block busy > 20/10:00:37|xfer_block busy > 20/10:00:37|xfer_block busy > 20/10:00:37|xfer_block busy > 20/10:00:37|xfer_block busy > 20/10:00:37|xfer_block busy > 20/10:00:37|xfer_block busy > 20/10:00:37|xfer_block busy > 20/10:00:37|xfer_block busy > 20/10:00:37|xfer_block busy > 20/10:00:37|xfer_block busy > 20/10:00:37|xfer_block busy > 20/10:00:37|xfer_block busy > 20/10:00:37|xfer_block busy > 20/10:00:37|xfer_block busy > 20/10:00:37|xfer_block busy > 20/10:00:39|xfer_block busy > 20/10:00:39|xfer_block busy > 20/10:00:39|xfer_block busy > 20/10:00:39|xfer_block busy > 20/10:00:39|xfer_block busy > 20/10:00:39|xfer_block busy > 20/10:00:39|xfer_block busy > 20/10:00:39|xfer_block busy > 20/10:00:39|xfer_block busy > 20/10:00:39|xfer_block busy > 20/10:00:39|xfer_block busy > 20/10:00:39|xfer_block busy > 20/10:00:39|xfer_block busy > 20/10:00:39|xfer_block busy > 20/10:00:39|xfer_block busy > 20/10:00:39|xfer_block busy > 20/10:00:39|xfer_block busy > 20/10:00:39|xfer_block busy > 20/10:00:39|xfer_block busy > 20/10:00:39|xfer_block busy > 20/10:00:39|xfer_block busy > 20/10:00:39|xfer_block busy > 20/10:00:39|xfer_block busy > 20/10:00:39|xfer_block busy > 20/10:00:39|xfer_block busy > 20/10:00:39|xfer_block busy > 20/10:00:39|xfer_block busy > 20/10:00:39|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:40|xfer_block busy > 20/10:00:41|xfer_block busy > 20/10:00:41|xfer_block busy > 20/10:00:41|xfer_block busy > 20/10:00:41|xfer_bxaida: release: > 20/10:00:41|loAIDAMEM: aidamem_release: > 20/10:00:41|ck busy > 20/10:00:41|xfer_block busy > 20/10:00:41|xfer_block busy > 20/10:00:41|xfer_block busy > 20/10:00:41|xfer_block busy > 20/10:00:41|xfer_block busy > 20/10:00:41|xfer_block busy > 20/10:00:41|xfer_block busy > 20/10:00:41|xfer_block busy > 20/10:00:41|xfer_block busy > 20/10:00:41|xfer_block busy > 20/10:00:41|xfer_block busy > 20/10:00:41|xfer_block busy > 20/10:00:41|xfer_block busy > 20/10:00:41|xfer_block busy > 20/10:00:41|xfer_block busy > 20/10:00:41|xfer_block busy > 20/10:00:41|xfer_block busy > 20/10:00:41|xfer_block busy > 20/10:00:41|xfer_block busy > 20/10:00:41|xfer_block busy > 20/10:00:41|xfer_block busy > 20/10:00:41|xfer_block busy > 20/10:00:41|SIGSEGV ERROR - Error in xfer ASIC procedures: location=0 > 20/10:00:41|xfer_block busy > 20/10:00:41|do_GetState returned z=0 and 1 > 20/10:01:27|executing generic doStop > 20/10:02:41|WriteRegister failed: Name=SigTask.EXEC.Usr1; Data=0; Code= POSIX ESRCH {no such process}; Info= sending signal SIGUSR1 to process 375 failed: no such > process > 20/10:02:42|StopC: > 20/10:02:42|do_GetState returned z=0 and 6 > 20/10:02:47|do_GetState returned z=0 and 6 > 20/10:02:58|do_GetState returned z=0 and 6 > 20/10:03:10|do_GetState returned z=0 and 6 > 20/10:03:21|do_GetState returned z=0 and 6 > 20/10:03:33|do_GetState returned z=0 and 6 > 20/10:03:44|do_GetState returned z=0 and 6 > 20/10:03:56|do_GetState returned z=0 and 6 > 20/10:04:07|do_GetState returned z=0 and 6 > 20/10:04:19|do_GetState returned z=0 and 6 > 20/10:04:30|do_GetState returned z=0 and 6 > 20/10:04:42|do_GetState returned z=0 and 6 > 20/10:04:53|do_GetState returned z=0 and 6 > 20/10:05:04|do_GetState returned z=0 and 6 > 20/10:05:16|do_GetState returned z=0 and 6 > 20/10:05:27|do_GetState returned z=0 and 6 > 20/10:05:39|do_GetState returned z=0 and 6 > 20/10:05:50|do_GetState returned z=0 and 6 > 20/10:06:02|do_GetState returned z=0 and 6 > 20/10:06:12|executing generic doReset > 20/10:06:21|WriteRegister failed: Name=SigTask.EXEC.Usr1; Data=0; Code= POSIX ESRCH {no such process}; Info= sending signal SIGUSR1 to process 375 failed: no such > process > 20/10:06:22|ResetC: > 20/10:06:22|do_GetState returned z=0 and 6 > 20/10:06:22|do_GetState returned z=0 and 6 > 20/10:06:34|do_GetState returned z=0 and 6 > 20/10:06:45|do_GetState returned z=0 and 6 > 20/10:06:57|do_GetState returned z=0 and 6 > INIT: Switching to runlevel: 6 > INStarting killall: Unmounting NFS filesystems: umount: /MIDAS: not mounted > 20/10:07:15|[ OK ] > 20/10:07:15|Stopping rpcbind: [ OK ] > 20/10:07:17|Shutting down kernel logger: [ OK ] > 20/10:07:19|Shutting down system logger: [ OK ] > 20/10:07:19|Stopping xinetd: [ OK ] > 20/10:07:19|[ OK ] > 20/10:07:19|Sending all processes the TERM signal... > 20/10:07:20|xaida: release: > 20/10:07:20|Sending all processes the KILL signal... > 20/10:07:25|Saving random seed: > 20/10:07:25|Syncing hardware clock to system time xaida: open: > 20/10:07:25|xaida: release: > 20/10:07:25|xaida: open: > 20/10:07:25|xaida: ioctl: called with command 536899587 > 20/10:07:25|xaida: ioctl: called with command 1076129801 > 20/10:07:25|RTCxaida: release: > 20/10:07:25|_RD_TIME: Inappropriate ioctl for device > 20/10:07:25|ioctl() to /dev/rtc to read the time failed. > 20/10:07:25| > 20/10:07:25|Please stand by while rebooting the system... > Sj�5õÅ07:27|Restarting system. > 20/10:07:29|ÉU�×®Ë > R� $T,W¤']Z�¥anuary 2017 > Flash base address=FC000000 > Set Flash to ASync Mode > XST_SUCCESS| > Finished copying zImage to RAM > 20/10:07:29| > Found 0 errors checking kernel image > 20/10:07:30|VHDL version number 0X03350706 > Based on AIDA Bootloader version number 1.2.0 -- 16th August 2012 > Starting LMK 3200 setup > 20/10:07:30| > Setting LMK03200 to standard clock settings -- External Clock 23Nov15 > .... SPI Base Address=0x81400000 > clk_control_reg=0x4 > 20/10:07:31|Next step is SPIconfig > Control 32(0x81400000)=0x180 > SlaveSel(0x81400000)=0x3 > Ctrl(0x81400000)=0xE6 > Ctrl(0x81400000)=0x86 > 20/10:07:31|SPIconfig done now to set up the LMK3200 registers > 20/10:07:31|LMK #0 : regInit[0]=0x80000000 > 20/10:07:31|LMK #0 : regInit[1]=0x10070600 > 20/10:07:31|LMK #0 : regInit[2]=0x60601 > 20/10:07:31|LMK #0 : regInit[3]=0x60602 > 20/10:07:31|LMK #0 : regInit[4]=0x60603 > 20/10:07:31|LMK #0 : regInit[5]=0x70624 > 20/10:07:31|LMK #0 : regInit[6]=0x70605 > 20/10:07:31|LMK #0 : regInit[7]=0x70606 > 20/10:07:31|LMK #0 : regInit[8]=0x70627 > 20/10:07:31|LMK #0 : regInit[9]=0x10000908 > 20/10:07:31|LMK #0 : regInit[10]=0xA0022A09 > 20/10:07:31|LMK #0 : regInit[11]=0x82800B > 20/10:07:31|LMK #0 : regInit[12]=0x28C800D > 20/10:07:31|LMK #0 : regInit[13]=0x830020E > 20/10:07:31|LMK #0 : regInit[14]=0xC800180F > Calibrate completed at 943 counts > Setting Clock Control =0x0000000B, to set GOE and sync bit > Ctrl @ SPIstop (0x81400000)=0x186 > Timeout waiting for Lock detect Stage 2 (Zero Delay), PWR_DWN=0x00000004 > 20/10:07:32| > Finished Clock setup LMK03200 > completed LMK 3200 setup > Loaded all four ASICs with default settings > Setting the ADCs into calibration mode > 20/10:07:32| > Control 32(0x81400400)=0x180 > SlaveSel(0x81400400)=0xFF > Ctrl(0x81400400)=0xE6 > Ctrl(0x81400400)=0x86 > Init : Config of AD9252 SPI ok > 20/10:07:32| > Ctrl @ SPIstop (0x81400400)=0x186ADCs initialised > Cal DCMs not locked > ADC calibrate failed > Jumping to kernel simpleboot... > 20/10:07:32| > zImage starting: loaded at 0x00a00000 (sp: 0x00bc4eb0) > Allocating 0x3b78cc bytes for kernel ... > gunzipping (0x00000000 <- 0x00a0f000:0x00bc380e)...done 0x39604c bytes > 20/10:07:35| > Linux/PowerPC load: console=ttyS0 root=/dev/nfs ip=on rw mem=112M > Finalizing device tree... flat tree at 0xbd1300 > Probing IIC bus for MAC... MAC address = 0xd8 0x80 0x39 0x41 0xd7 0xcc > 20/10:07:42|Using Xilinx Virtex440 machine description > 20/10:07:42|Linux version 2.6.31 (nf@nnlxb.dl.ac.uk) (gcc version 4.2.2) #34 PREEMPT Tue Nov 15 15:57:04 GMT 2011 > 20/10:07:42|Zone PFN ranges: > 20/10:07:42| DMA 0x00000000 -> 0x00007000 > 20/10:07:42| Normal 0x00007000 -> 0x00007000 > 20/10:07:42|Movable zone start PFN for each node > 20/10:07:42|early_node_map[1] active PFN ranges > 20/10:07:43| 0: 0x00000000 -> 0x00007000 > 20/10:07:43|MMU: Allocated 1088 bytes of context maps for 255 contexts > 20/10:07:43|Built 1 zonelists in Zone order, mobility grouping on. Total pages: 28448 > 20/10:07:43|Kernel command line: console=ttyS0 root=/dev/nfs ip=on rw mem=112M > 20/10:07:43|PID hash table entries: 512 (order: 9, 2048 bytes) > 20/10:07:43|Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) > 20/10:07:43|Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) > 20/10:07:43|Memory: 109680k/114688k available (3500k kernel code, 4852k reserved, 144k data, 130k bss, 168k init) > 20/10:07:43|Kernel virtual memory layout: > 20/10:07:43| * 0xffffe000..0xfffff000 : fixmap > 20/10:07:43| * 0xfde00000..0xfe000000 : consistent mem > 20/10:07:43| * 0xfde00000..0xfde00000 : early ioremap > 20/10:07:43| * 0xd1000000..0xfde00000 : vmalloc & ioremap > 20/10:07:43|NR_IRQS:512 > 20/10:07:43|clocksource: timebase mult[a00000] shift[22] registered > 20/10:07:43|Console: colour dummy device 80x25 > 20/10:07:43|Mount-cache hash table entries: 512 > 20/10:07:43|NET: Registered protocol family 16 > 20/10:07:43|PCI: Probing PCI hardware > 20/10:07:43|bio: create slab <bio-0> at 0 > 20/10:07:44|NET: Registered protocol family 2 > 20/10:07:44|IP route cache hash table entries: 1024 (order: 0, 4096 bytes) > 20/10:07:44|TCP established hash table entries: 4096 (order: 3, 32768 bytes) > 20/10:07:44|TCP bind hash table entries: 4096 (order: 2, 16384 bytes) > 20/10:07:44|TCP: Hash tables configured (established 4096 bind 4096) > 20/10:07:44|TCP reno registered > 20/10:07:44|NET: Registered protocol family 1 > 20/10:07:44|ROMFS MTD (C) 2007 Red Hat, Inc. > 20/10:07:44|msgmni has been set to 214 > 20/10:07:44|io scheduler noop registered > 20/10:07:44|io scheduler anticipatory registered > 20/10:07:44|io scheduler deadline registered > 20/10:07:44|io scheduler cfq registered (default) > 20/10:07:44|Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled > 20/10:07:44|83e00000.serial: ttyS0 at MMIO 0x83e01003 (irq = 16) is a 16550 > 20/10:07:44|console [ttyS0] enabled > 20/10:07:44|brd: module loaded > 20/10:07:44|loop: module loaded > 20/10:07:44|Device Tree Probing 'ethernet' > 20/10:07:44|xilinx_lltemac 81c00000.ethernet: MAC address is now d8:80:39:41:d7:cc > 20/10:07:44|xilinx_lltemac 81c00000.ethernet: XLlTemac: using DMA mode. > 20/10:07:44|XLlTemac: DCR address: 0x80 > 20/10:07:44|XLlTemac: buffer descriptor size: 32768 (0x8000) > 20/10:07:45|XLlTemac: Allocating DMA descriptors with kmalloc > 20/10:07:45|XLlTemac: (buffer_descriptor_init) phy: 0x6938000, virt: 0xc6938000, size: 0x8000 > 20/10:07:45|XTemac: PHY detected at address 7. > 20/10:07:45|xilinx_lltemac 81c00000.ethernet: eth0: Xilinx TEMAC at 0x81C00000 mapped to 0xD1024000, irq=17 > 20/10:07:45|fc000000.flash: Found 1 x16 devices at 0x0 in 16-bit bank > 20/10:07:45| Intel/Sharp Extended Query Table at 0x010A > 20/10:07:45| Intel/Sharp Extended Query Table at 0x010A > 20/10:07:45| Intel/Sharp Extended Query Table at 0x010A > 20/10:07:45| Intel/Sharp Extended Query Table at 0x010A > 20/10:07:45| Intel/Sharp Extended Query Table at 0x010A > 20/10:07:45| Intel/Sharp Extended Query Table at 0x010A > 20/10:07:45|Using buffer write method > 20/10:07:45|cfi_cmdset_0001: Erase suspend on write enabled > 20/10:07:45|cmdlinepart partition parsing not available > 20/10:07:45|RedBoot partition parsing not available > 20/10:07:45|Creating 5 MTD partitions on "fc000000.flash": > 20/10:07:45|0x000000000000-0x000000500000 : "golden_firmware" > 20/10:07:45|0x000000500000-0x000000800000 : "golden_kernel" > 20/10:07:45|0x000000800000-0x000000d00000 : "user_firmware" > 20/10:07:46|0x000000d00000-0x000000fe0000 : "user_kernel" > 20/10:07:46|0x000000fe0000-0x000001000000 : "env_variables" > 20/10:07:46|xilinx-xps-spi 81400400.hd-xps-spi: at 0x81400400 mapped to 0xD1028400, irq=20 > 20/10:07:46|SPI: XIlinx spi: bus number now 32766 > 20/10:07:46|xilinx-xps-spi 81400000.xps-spi: at 0x81400000 mapped to 0xD102C000, irq=21 > 20/10:07:46|SPI: XIlinx spi: bus number now 32765 > 20/10:07:46|mice: PS/2 mouse device common for all mice > 20/10:07:46|Device Tree Probing 'i2c' > 20/10:07:46| #0 at 0x81600000 mapped to 0xD1030000, irq=22 > 20/10:07:46|at24 0-0050: 1024 byte 24c08 EEPROM (writable) > 20/10:07:46|TCP cubic registered > 20/10:07:46|NET: Registered protocol family 17 > 20/10:07:46|RPC: Registered udp transport module. > 20/10:07:46|RPC: Registered tcp transport module. > 20/10:07:46|eth0: XLlTemac: Options: 0x3fa > 20/10:07:47|eth0: XLlTemac: allocating interrupt 19 for dma mode tx. > 20/10:07:47|eth0: XLlTemac: allocating interrupt 18 for dma mode rx. > 20/10:07:47|eth0: XLlTemac: speed set to 1000Mb/s > 20/10:07:49|eth0: XLlTemac: Send Threshold = 24, Receive Threshold = 4 > 20/10:07:49|eth0: XLlTemac: Send Wait bound = 254, Receive Wait bound = 254 > 20/10:07:49|Sending DHCP requests ., OK > 20/10:07:50|IP-Config: Got DHCP answer from 192.168.11.99, my address is 192.168.11.5 > 20/10:07:50|IP-Config: Complete: > 20/10:07:50| device=eth0, addr=192.168.11.5, mask=255.255.255.0, gw=255.255.255.255, > 20/10:07:50| host=aida05, domain=dl.ac.uk, nis-domain=nuclear.physics, > 20/10:07:50| bootserver=192.168.11.99, rootserver=192.168.11.99, rootpath=/home/Embedded/XilinxLinux/ppc_4xx/rfs/aida05 > 20/10:07:50|Looking up port of RPC 100003/2 on 192.168.11.99 > 20/10:07:51|Looking up port of RPC 100005/1 on 192.168.11.99 > 20/10:07:51|VFS: Mounted root (nfs filesystem) on device 0:12. > 20/10:07:51|Freeing unused kernel memory: 168k init > INIT: version 2.86 booting > 20/10:07:51|Starting sysinit... > 20/10:07:51| Welcome to DENX & STFC Daresbury Embedded Linux Environment > 20/10:07:52| Press 'I' to enter interactive startup. > 20/10:07:52|Setting clock (utc): Tue Apr 20 10:07:52 BST 2021 [ OK ] > 20/10:07:53|Building the cache [ OK ] > 20/10:07:53|Setting hostname aida05: [ OK ] > 20/10:07:54|Mounting local filesystems: [ OK ] > 20/10:07:55|Enabling /etc/fstab swaps: [ OK ] > 20/10:07:57|Finishing sysinit... > INIT: Entering runlevel: 3 > 20/10:08:00|Entering non-interactive startup > 20/10:08:01|FATAL: Module ipv6 not found. > 20/10:08:02|Bringing up loopback interface: [ OK ] > 20/10:08:04|FATAL: Module ipv6 not found. > 20/10:08:04|Starting system logger: [ OK ] > 20/10:08:05|Starting kernel logger: [ OK ] > 20/10:08:05|Starting rpcbind: [ OK ] > 20/10:08:06|Mounting NFS filesystems: [ OK ] > 20/10:08:07|Mounting other filesystems: [ OK ] > 20/10:08:07|Starting xinetd: [ OK ] > 20/10:08:08|Starting midas: Starting MIDAS Data Acquisition for aida05 > 20/10:08:08|xaida: device parameters: base=0x81000000 size=0x200000 > 20/10:08:14|Trying to free nonexistent resource <0000000081000000-00000000811fffff> > 20/10:08:14|xaida: mem region start 0x81000000 for 0x200000 mapped at 0xd2100000 > 20/10:08:14|xaida: driver assigned major number 254 > 20/10:08:14|Trying to free nonexistent resource <0000000007000000-0000000007ffffff> > 20/10:08:20|AIDAMEM: aidamem: mem region start 0x7000000 for 0x1000000 mapped at 0xd2380000 > 20/10:08:20|AIDAMEM: aidamem: driver assigned major number 253 > 20/10:08:20|System identified is CPU ppc; Platform is unix; OS is Linux and Version is 2.6.31 > 20/10:08:26|Environment selected is CPU ppc; Platform unix; OS Linux and Operating System linux-ppc_4xx > 20/10:08:27|MIDASBASE = /MIDAS and MIDAS_LIBRARY = /MIDAS/TclHttpd/linux-ppc_4xx > 20/10:08:27|PATH = /MIDAS/bin_linux-ppc_4xx:/MIDAS/TclHttpd/linux-ppc_4xx:/MIDAS/linux-ppc_4xx/bin:/MIDAS/linux-ppc_4xx/bin:/sbin:/usr/sbin:/bin:/usr/bin > 20/10:08:27|Computer Name = aida05; Temp Directory = /tmp/tcl356 > 20/10:08:30|package limit is not available: can't find package limit > 20/10:08:33|Running with default file descriptor limit > 20/10:08:33|package setuid is not available: can't find package setuid > 20/10:08:35|Running as user 0 group 0 > 20/10:08:35| > 20/10:08:36|AIDA Data Acquisition Program Release 9_10.Apr 3 2019_11:34:31 starting
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown