ELOG DESPEC

AIDA GELINA BRIKEN nToF CRIB ISOLDE CIRCE nTOFCapture DESPEC DTAS EDI_PSA 179Ta CARME StellarModelling DCF K40

DESPEC

Fields marked with * are required
Entry time:	Sat Mar 29 11:27:41 2025
Author*:
Subject*:
> 08:00 CA takes over > > 08:28 Problem at UNILAC - no beam > > 09:30 all system wide checks ok except > > all FEE64 fail ADC calibration (no waveforms) > > WR decoder status: > > Base Current Difference > aida01 fault 0xf932 : 0xf933 : 1 > aida02 fault 0x62ec : 0x62ed : 1 > aida03 fault 0x8679 : 0x867a : 1 > aida04 fault 0xf0e4 : 0xf0e5 : 1 > aida05 fault 0x9db8 : 0x9dc2 : 10 > aida06 fault 0x7f18 : 0x7f19 : 1 > aida07 fault 0xdd2c : 0xdd2d : 1 > aida08 fault 0x1557 : 0x1558 : 1 > White Rabbit error counter test result: Passed 8, Failed 8 > > Understand the status reports as follows:- > Status bit 3 : White Rabbit decoder detected an error in the received data > Status bit 2 : Firmware registered WR error, no reload of Timestamp > Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR > > FPGA timestamp errors: > > Base Current Difference > aida05 fault 0x0 : 0x2 : 2 > FPGA Timestamp error counter test result: Passed 15, Failed 1 > If any of these counts are reported as in error > The ASIC readout system has detected a timeslip. > That is the timestamp read from the time FIFO is not younger than the last > > 09:36 FEE64 Temperatures ok - attachment 1 > > Detector bias / leakage currents ok - attachment 2 > > Statistics - attachments 3-8 > > 09:50 beam is back - writing to file R4_265 > > 09:56 FRS adjusting degrader settings (S4) - temporarily remove to check counts in scintillator vs AIDA > > 10:10 FRS increase degrader thickness > > 10.28 all histograms, stats and merger stats zero'd > > 10.50 all system wide checks ok except > Base Current Difference > aida01 fault 0xf932 : 0xf933 : 1 > aida02 fault 0x62ec : 0x62ed : 1 > aida03 fault 0x8679 : 0x867a : 1 > aida04 fault 0xf0e4 : 0xf0e5 : 1 > aida05 fault 0x9db8 : 0x9dc2 : 10 > aida06 fault 0x7f18 : 0x7f19 : 1 > aida07 fault 0xdd2c : 0xdd2d : 1 > aida08 fault 0x1557 : 0x1558 : 1 > White Rabbit error counter test result: Passed 8, Failed 8 > > Understand the status reports as follows:- > Status bit 3 : White Rabbit decoder detected an error in the received data > Status bit 2 : Firmware registered WR error, no reload of Timestamp > Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR > > > Base Current Difference > aida05 fault 0x0 : 0x3 : 3 > FPGA Timestamp error counter test result: Passed 15, Failed 1 > If any of these counts are reported as in error > The ASIC readout system has detected a timeslip. > That is the timestamp read from the time FIFO is not younger than the last > > > Returned 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 > Mem(KB) : 4 8 16 32 64 128 256 512 1k 2k 4k > aida01 : 3 2 2 2 2 2 2 4 3 3 6 : 36860 > aida02 : 7 3 5 1 2 5 2 4 3 3 6 : 37284 > aida03 : 7 5 3 1 4 4 2 3 3 3 6 : 36756 > aida04 : 3 1 20 4 2 3 3 5 1 3 6 : 36052 > aida05 : 19 25 26 6 2 2 3 2 2 3 6 : 35828 > aida06 : 1 3 16 1 3 4 1 5 1 3 6 : 35580 > aida07 : 6 4 1 2 3 3 2 3 3 3 6 : 36552 > aida08 : 8 5 2 3 2 3 2 2 2 4 6 : 37064 > aida09 : 9 7 1 2 2 4 2 3 3 3 6 : 36652 > aida10 : 2 5 3 1 1 4 2 3 3 3 6 : 36544 > aida11 : 16 4 4 2 1 2 2 3 3 3 6 : 36384 > aida12 : 2 1 1 3 1 2 2 3 3 3 6 : 36288 > aida13 : 0 1 1 2 0 4 3 2 3 3 6 : 36184 > aida14 : 6 3 2 0 2 3 2 3 3 3 6 : 36432 > aida15 : 25 8 2 1 2 3 1 2 2 4 6 : 36836 > aida16 : 3 5 1 2 2 2 3 2 3 3 6 : 36100 > > > Collecting the file size of each FEE64 Options CONTENTS file to check they are all the same > > FEE : aida01 => Options file size is 1026 Last changed Thu May 13 05:49:42 CEST 2021 > FEE : aida02 => Options file size is 1014 Last changed Thu Apr 29 14:43:46 CEST 2021 > FEE : aida03 => Options file size is 1014 Last changed Thu Apr 29 14:43:50 CEST 2021 > FEE : aida04 => Options file size is 1014 Last changed Thu Apr 29 14:43:53 CEST 2021 > FEE : aida05 => Options file size is 1014 Last changed Thu Apr 29 14:43:55 CEST 2021 > FEE : aida06 => Options file size is 1014 Last changed Thu Apr 29 14:43:59 CEST 2021 > FEE : aida07 => Options file size is 1014 Last changed Thu Apr 29 14:44:02 CEST 2021 > FEE : aida08 => Options file size is 1025 Last changed Wed May 05 12:15:54 CEST 2021 > FEE : aida09 => Options file size is 1014 Last changed Thu Apr 29 14:44:08 CEST 2021 > FEE : aida10 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021 > FEE : aida11 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021 > FEE : aida12 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021 > FEE : aida13 => Options file size is 1025 Last changed Fri May 07 19:40:34 CEST 2021 > FEE : aida14 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021 > FEE : aida15 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021 > FEE : aida16 => Options file size is 1014 Last changed Thu Apr 29 14:44:57 CEST 2021 > > 10.50 DAQ continues S496/R4_304 > > 11:18 FEE64 Temperatures ok - attachment 9 > > Detector bias & leakage currents ok - attachment 10 > > statistics - attachments 11-16 > > 15:00 FEE64 avg. CPU usage (%) > > 1 52 > 2 55 > 3 55 > 4 60 > 5 93 > 6 50 > 7 53 > 8 55 > 9 55 > 10 51 > 11 50 > 12 67 > 13 56 > 14 55 > 15 55 > 16 58 > > 15:08 all system wide checks ok except > > all FEE64 fail ADC calibration (no waveform) > > WR decoder status: > > Base Current Difference > aida01 fault 0xf932 : 0xf933 : 1 > aida02 fault 0x62ec : 0x62ed : 1 > aida03 fault 0x8679 : 0x867a : 1 > aida04 fault 0xf0e4 : 0xf0e5 : 1 > aida05 fault 0x9db8 : 0x9dc3 : 11 > aida06 fault 0x7f18 : 0x7f19 : 1 > aida07 fault 0xdd2c : 0xdd2d : 1 > aida08 fault 0x1557 : 0x1558 : 1 > White Rabbit error counter test result: Passed 8, Failed 8 > > Understand the status reports as follows:- > Status bit 3 : White Rabbit decoder detected an error in the received data > Status bit 2 : Firmware registered WR error, no reload of Timestamp > Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR > > FPGA errors: > > Base Current Difference > aida05 fault 0x0 : 0x3 : 3 > FPGA Timestamp error counter test result: Passed 15, Failed 1 > If any of these counts are reported as in error > The ASIC readout system has detected a timeslip. > That is the timestamp read from the time FIFO is not younger than the last > > 15:10 Temperatures ok - attachment 17 > > Detector bias / leakage current ok - attachment 18 > > Statistics - attachments 18 -24 Encoding: HTML ELCode plain Suppress Email notification

Attachment 1:
Drop attachments here...

ELOG V3.1.4-unknown