ELOG DESPEC

AIDA GELINA BRIKEN nToF CRIB ISOLDE CIRCE nTOFCapture DESPEC DTAS EDI_PSA 179Ta CARME StellarModelling DCF K40

DESPEC

Fields marked with * are required
Entry time:	Sat Mar 29 11:29:53 2025
Author*:
Subject*:
> 00:00 CA takes over > LS has performed usual checks, see previous Elog entry - all ok > > 00:30 stats ok > R14_470 deadtime at 4.4% > > 02:10 system wide checks ok except: > > all ADC fail calibration (expected, no waveforms) > > WR decoder status > > Base Current Difference > aida05 fault 0x500 : 0x52f : 47 > White Rabbit error counter test result: Passed 15, Failed 1 > > Understand the status reports as follows:- > Status bit 3 : White Rabbit decoder detected an error in the received data > Status bit 2 : Firmware registered WR error, no reload of Timestamp > Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR > > 02:12 FEE64 Temps ok - attachment 1 > Stats ok - attachment 2 > detector bias / leakage currents ok - attachment 3 > dead-times ok - R14_497 max 4% - attachment 4 > > 03:27 DAQ continues ok - writing to file R14_517 > > 04:07 system wide checks ok except: > > all ADC fail calibration (expected, no waveforms) > > WR decoder status > > Base Current Difference > aida05 fault 0x500 : 0x537 : 55 > White Rabbit error counter test result: Passed 15, Failed 1 > > Understand the status reports as follows:- > Status bit 3 : White Rabbit decoder detected an error in the received data > Status bit 2 : Firmware registered WR error, no reload of Timestamp > Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR > > FEE64 Temps ok - attachment 6 > Stats ok - attachment 5 > detector bias / leakage currents ok - attachment 7 > dead-times ok - R14_526 max 4% - attachment 8 > > 05:27 bad timestamp error in merger terminal - attachment 9 > > 06:05 all system wide checks ok except; > > all ADC fail calibration (expected, no waveforms) > > WR decoder status > > Base Current Difference > aida05 fault 0x500 : 0x53d : 61 > White Rabbit error counter test result: Passed 15, Failed 1 > > Understand the status reports as follows:- > Status bit 3 : White Rabbit decoder detected an error in the received data > Status bit 2 : Firmware registered WR error, no reload of Timestamp > Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR > > 06:07 FEE64 Temps ok - attachment 10 > Stats ok - attachment 11 > detector bias / leakage currents ok - attachment 12 > dead-times ok - R14_558 max 3.6% - attachment 13 > > 07:01 another bad timestamp error in merger terminal - attachment 14 Encoding: HTML ELCode plain Suppress Email notification

Attachment 1:
Drop attachments here...

ELOG V3.1.4-unknown