AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
DESPEC
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 11:32:01 2025
Author
*
:
Subject
*
:
> 08:00 OH and TD take over > Current settings p+n sides at 0xc > DSSD1 n+n sides 0x20 on ASICs 1-3 and 0x64 on ASIC 4 > DSSD2 n+n sides 0x1b on ASICs 1-3 and 0x64 on ASIC 4 > > PULSER SETTINGS > --------------------------- > Pulse is ON > Positive Tail Pulse > Trigger Source is Internal Clock > Trigger Threshold is 3.5 > Amplitude : 2.0 Volts > Rep Rate : 2.0 hZ > Delay : 250.0 ns > Fall Time : 1 ms > Attenuation : 1 > Display is : Volts > Equivalent keV is : 200.0 > Ramp Start at 0.01 Volts > Ramp Stop at 9.99 Volts > Ramp Start at 1.0 keV > Ramp Stop at 999.0 keV > Ramp Time is 60 seconds > # Ramp Cycles is 1 > > 08:29 System wide checks ok - WR difference at 111 > Statistics ok (Still high following the sharp rise at 18:30 yesterday) - attachment 1 > Temperature ok - attachment 2 > Bias and leakage current ok - attachment 3 > > 09:58 System wide checks ok - WR difference at 111 > Statistics ok - attachment 4 > Temperature ok - attachment 5 > Bias and leakage current ok - attachment 6 > > Max deadtime this morning has been around 5.5% on FEE8 > > 12:32 System wide checks ok - WR difference at 111 > Statistics ok - attachment 7 > Temperature ok - attachment 9 > Bias and leakage current ok - attachment 8
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown