AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
DESPEC
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 11:30:04 2025
Author
*
:
Subject
*
:
> 16:00 CA takes over > DSSD1 n+n sides 0x20 on ASICs 1-3 and 0x64 on ASIC 4 > DSSD2 n+n sides 0x1b on ASICs 1-3 and 0x64 on ASIC 4 > > PULSER SETTINGS > --------------------------- > Pulse is ON > Positive Tail Pulse > Trigger Source is Internal Clock > Trigger Threshold is 3.5 > Amplitude : 2.0 Volts > Rep Rate : 2.0 hZ > Delay : 250.0 ns > Fall Time : 1 ms > Attenuation : 1 > Display is : Volts > Equivalent keV is : 200.0 > Ramp Start at 0.01 Volts > Ramp Stop at 9.99 Volts > Ramp Start at 1.0 keV > Ramp Stop at 999.0 keV > Ramp Time is 60 seconds > # Ramp Cycles is 1 > > 16:14 system wide checks all ok *except* > > Base Current Difference > aida05 fault 0x500 : 0x570 : 112 > White Rabbit error counter test result: Passed 15, Failed 1 > > Understand the status reports as follows:- > Status bit 3 : White Rabbit decoder detected an error in the received data > Status bit 2 : Firmware registered WR error, no reload of Timestamp > Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR > > 16:17 temperatures ok - attachment 1 > statistics ok - attachment 2 > detector bias / leakage currents ok - attachment 3 > analysis of R14_1625 - FEE7 deadtime at 4.5% > > 18:06 system wide checks all ok *except* > > Base Current Difference > aida05 fault 0x500 : 0x571 : 113 > White Rabbit error counter test result: Passed 15, Failed 1 > > Understand the status reports as follows:- > Status bit 3 : White Rabbit decoder detected an error in the received data > Status bit 2 : Firmware registered WR error, no reload of Timestamp > Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR > > 18:07 temperatures ok - attachment 4 > statistics ok - attachment 5 > detector bias / leakage currents ok - attachment 6 > analysis of R14_1662 - FEE7 deadtime at 4.3% > > 19:07 DAQ continues ok - writing to file R14_1682 > > 20:07 system wide checks all ok *except* > > Base Current Difference > aida05 fault 0x500 : 0x572 : 114 > White Rabbit error counter test result: Passed 15, Failed 1 > > Understand the status reports as follows:- > Status bit 3 : White Rabbit decoder detected an error in the received data > Status bit 2 : Firmware registered WR error, no reload of Timestamp > Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR > > 20:10 temperatures ok - attachment 7 > statistics ok - attachment 8 > detector bias / leakage currents ok - attachment 9 > analysis of R14_1703 - max deadtime at 4.0% - attachment 10 > > 20:35 rate spectra - attachment 11 > HEC spectra - attachment 12 & 13 > > 20:36 all histograms zeroed > > 20:37 DAQ continues ok - writing to file R14_1712 > > 20:45 /media/1e121361-83d3-4825-b6ae-9700b07e0ca7 at 94% use. > > ~ 12 hours until 100% at 10 MB/s data rate, not accounting for compression of older files > > 21:12 no beam - writing to file R14_1723 > > 21:17 beam is back > > 22:07 system wide checks all ok - WR decoder fault same as entry at 20:07 > > 22:08 temperatures ok - attachment 14 > statistics ok - attachment 15 > detector bias / leakage currents ok - attachment 16 > analysis of R14_1740 - max deadtime at 4.2% - attachment 17 > > > > > > > > >
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown