AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
DESPEC
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Tue Feb 1 15:00:28 2022
Author
*
:
Subject
*
:
FONT
Arial
Comic Sans MS
Courier New
Tahoma
Times New Roman
Verdana
SIZE
1
2
3
4
5
6
COLOR
blue
dark-blue
orange
red
dark red
green
dark-green
pink
purple
chocolate
Starting up AIDA on CentOS 7 to confirm things work (based on some CARME experience) NFS settings: /etc/exports copied over from old disk line to old /MIDAS_130718 export removed (commented) to see if necessary to copy over nfsv2 enabled in nfs.conf NFS service enabled and started (systemctl enable nfs-server ; systemctl start nfs-server) DHCP setting: DHCP was disabled, enabled and started (systemctl enable dhcpd ; systemctl start dhcpd) Raspberry Pis pick up IP and become responsive again Firwall setting: Interface p4p1 (AIDA switch #1) is changed to zone 'trusted' so that FEEs can connect to NFS (panicked before unable to get RPC port) See FEEs starting to boot! Getting both / and /MIDAS successfully (note confirming that old /MIDAS_130718 is not needed) FEEs 4 and 9 take longer to boot others (observed before, seems to be PSU slots 4/5 in first take a while to provide voltage) FEE9 seems to panic after mounting root, waiting to see if it reboots itself (no serial) ... Nope but power cycle fixes it All FEEs online and Reset/Setup completed... Temps OK Note 1: CentOS 7 uses systemd, monitoring log is best done as `journalctl -f` as root. npg not in sudoers (should be done) Note 2: System used as graphical terminal for Edinburgh double-alpha experiment until Feb. 11 AIDA operated in background and using port forwarding to access MIDAS/Web mostly UI has weird workspace configuration by default needs changing to better cope with AIDA windows Note 3: Only 4 FEEs are producing serial data to the Pi_Monitor Probably 2 of the USB hubs were knocked lose (from the USB extender cables) when the Fatima/HPGe cables were removed last year S4 access is limited but will try to reconnect ASAP Note 4: AIDA setup unfortunately quite limited in functionality due to other running experiments: WR is unavailable as VETAR VME crate was powered off Not all FEEs are connected to pulser or grounded. Some cables were removed during testing last year. Some ground cables removed and pulser inverter removed as needed at CARME and S4 access is now limited for WASA tests
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Resubmit as new entry
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown