AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
DESPEC
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Fri Feb 11 12:09:24 2022
Author
*
:
Subject
*
:
FONT
Arial
Comic Sans MS
Courier New
Tahoma
Times New Roman
Verdana
SIZE
1
2
3
4
5
6
COLOR
blue
dark-blue
orange
red
dark red
green
dark-green
pink
purple
chocolate
Use beam break between FRS experiments to finalise getting AIDA testable for PJCS etc. USB hubs reconnected - all 16 ttyUSBs seem to be visible now New inverter installed (Ortec 533 Sum Invert, brand new) - Pulser T connected to input B1 and inverted out B sent to -ve FEEs VME crate for VETAR2 is powered on so White Rabbit should be available All grounds reconnected on FEEs All FEEs connected to pulser chain again - Moved interlock to new Al shelf on AIDA rack so it's not kicked Powered on OK, all 4 lights on in box but AIDA Relay had to water light Investigation shows the cable between relay and interlock was broken, one wire had come loose from connector Resoldered and now it works as usual System powered up OK All 16 FEEs respond to serial All 16 FEEs have WR All 16 FEEs show pulser ADC entries Seems good!
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Resubmit as new entry
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown