Every 30 minutes:

- Reload statistics (Web browser tab screen 1, workspace 3)
    - Are all FEEs still showing a rate?
    - If one shows 0 after multiple reloads Call Oscar or Tom.

- IGNORE FOR TIME BEING Options database monitor (Top middle terminal screen 2, workspace 3)
    - Has the message changed since the last check?
    - If so copy the message and place in elog

- Do the ucesb scalers make sense? (Web browser, screen 2, workspace 5)
    - If one DSSD is reporting kHz of implants when the others are much less it is likely an ASIC getting stuck.
    - Perform and ASIC check (ASIC control tab, web browser, screen 1, workspace 3)
        - Ensure "Act on all FEE" and "Act on all asic" selected
        - Click on drop down menu in the bottom of the screen and select check ASIC control
        - It will take a minute or so be patient (MIDAS can only respond to one command at once so don't try to do anything else)
        - A pop up will appear check that all options say ok
        - Has the implant rate gone to a more normal amount?
            - If not feel free to call

Every two hours:

- Take a screenshot of the statistics page (Web browser tab screen 1, workspace 3)
     - Compare to the previous screenshot to check if anything has drastically changed

- Take a screenshot of the temperatures (Web browser tab screen 1, workspace 3)
     - Do they all appear stable?

- Take a screenshot of the bias and leakage currents - (Top left terminal, screen 2, workspace 3)

- Perform the five system wide checks (Web browser tab screen 1, workspace 3)
     - Ignore the system wide checks for ADC calibration (ADCs are turned off so they will all fail)
     - Check memory information also fails.
     - Make a note in the elog of which tests are successful
     - If failed copy the text from the white box into the elog and make a note of it

- Enter the screenshots into the elog

- Update the leakage current spreadsheet (Web browser, screen 2, workspace 5)