AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
DESPEC
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Mon Mar 31 00:40:37 2025
Author
*
:
Subject
*
:
> bPlas has been mostly cabled in now > > Reseat LAN cable (AIDA Switch -> AIDA-3) and reachieve 1 gbit/s speed as needed. > > CHeck DAQ with MBS, working well (16 MB/s). Performance seems better than before on MBS side too > > Note implant counts in aida05, observable in rate spectra (fig 1) > Also a few early channels in aida10 seem empty > > ASIC check-loads didn't fix > Try powercycle... also didn't fix > > Tomorrow will inspect adapter board and ribbon cable, perhaps it is loose. > > Absolute rates otherwise seem OK (fig 2) aida01 and aida07 are both very hot. > aida01 is usually quieter but aida07 has always been observed running fast
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown