AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
DESPEC
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sun Mar 30 09:22:07 2025
Author
*
:
Subject
*
:
8:15am S4 CONTROLLED ACCESS to remove beam plug and check bPlas/AIDA response to beam Reseat aida05 ribbon cable on adapter board while in... No difference to rates, aida05 still shows hot asic01 aida14 seems seated OK, still asic02 basically empty Noise level still high, threshold set to 0x20 (320 keV) which has decent rate Start forwarding to MBS with 0x20 thresholds 10.12 slow comparator 0x20 -> 0xa Attachments 1-5 Attachment 6 ADC data items c. 150-180k per FEE64, c. 21Mb to disk Attachment 7 FEE64 temps OK Attachment 8 DSSSD bias & leakage currents OK 13.30 system checks N.B. aida05 ASIC temp low and pause/resume data rate high Attachment 9 grafana monitor of DSSSD bias & leakage current & temperature OK Attachments 10-15 spectra Attacahments 16-19 system wide checks OK *except* WR error counter Attachment 20 ADC data items c. 150-180k per FEE64, c. 21Mb to disk Attachment 21 FEE64 temps OK Attachment 22 DSSSD bias & leakage currents OK Attachments 23-29 newMerger stats 20:37 - Begin implantation test, raise threshold to 0x64 just to ensure system is stable 22:26 - No implantation test although we had some brief beam through AIDA. - FRS team having difficulty aligning beam still, will work overnight and try to implant tomorrow Will keep DAQ on 0x64 to eliminate deadtime issues for implantation
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown