AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
DESPEC
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sun Mar 30 09:18:31 2025
Author
*
:
Subject
*
:
> > 08.10 AIDA DAQ status > > 14x FEE64s configured - aida05, aida14 power OFF - dhcpd.conf changed - aida15 -> aida05, aida16 -> aida14 > 2 > AD9222 OFF - waveforms disabed > disc - all disabled > > ASIC settings 2021Apr29-13-16-00 > slow comparator 0xc *except* aida02 & aida04 0x16, aida06 & aida08 0x23 > > BNC PB-5 > amplitude 1.000V > attenuation x1 > tau_d 1ms (tail pulse) > polarity + > frequency 22Hz > > 08.14 all histograms zero'd > 2 > 08.15 system wide check counter baseline > > 08.17 check ASIC control - all FEE64s all ASICs > > Attachment 1 - grafana DSSSD bias & leakage current - OK > > Attachment 2 - per FEE64 stat spectra > > Attachments 3 & 4 - per FEE64 1.8.H spectra - few events c. 5GeV p+n strips > > Attachments 5 & 6 - per FEE64 1.8.L spectra > pulser peak width aida01 124ch FWHM, aida04 293ch FWHM > > Attachment 7 - per FEE64 rate spectra > > Attachments 8-12 - system wide checks - all OK > > Attachments 13-16 - statistics - adc, pause, resume & correlation data > > Attachment 17 - FEE64 temps OK > > Attachment 18 - DSSSD bias & leakage current OK - start new section of googledoc spreadsheet to monitor long term trends > > Attachments 19 & 20 - NewMerger & TapeServer - OK - no warning messages > > 08.44 DAQ continues - file NOTAPE/R18 - no storage mode > > 08.47 switch to storage mode to generate data file to evaluate FEE64 dead times etc > > 08.53 no storage mode enabled > > Attachment 21 - analysis of file NOTAPE/R18_20 > > Attachment 22- analysis of file NOTAPE/R19_19 > AIDA12 slow comp up to 0xd improved deadtime drastically for FEE > > 10:54 Beam on detector. Take another run to test deadtime - attachment 23 > Deadtimes ranging from 10-40% in n+n FEEs > > Attachment 23 & 24 aida06 aida02 1.*.H spectra > > > 14:07 - Currently no beam so had acces. OH checked the cables on AIDA12 were seated correctly. No improvement in the rate for 12 but better for remaining p+n strips. > Tested running with dataspy off for PCS but observed no change in the deadtimes (Other than a decrease because no beamtime)
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown