AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
DESPEC
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 11:28:45 2025
Author
*
:
Subject
*
:
> DSSD stack will be as follows > > 1 3208-7 1019 125 upstream > 2 3208-13 1020 120 downstream > > First start checking bias pins on both detectors > These are pins on the *bottom right* of each 68 pin connector (C-2299) > Expect finite resistance > > 3208-7: > Top and bottom: 22 Ohm > Left and right: 22 Ohm > > 3208-13: > Top and bottom: 22 Ohm > Left and right: 22 Ohm > > Conclusion: All bias bond wires are intact on both DSSDs > > Visual inspection is both DSSDs look good with no damage or bond wire issues > > Installed in snout: full stack > > 3 mm bPlas 1 > 17 mm Air > 1 mm AIDA 1 (645 mm from base of snout) > 9 mm Air > 1 mm AIDA 2 (655 mm from base of snout) > 12 mm Air > 3 mm bPlas 2
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown