ELOG DESPEC

AIDA GELINA BRIKEN nToF CRIB ISOLDE CIRCE nTOFCapture DESPEC DTAS EDI_PSA 179Ta CARME StellarModelling DCF K40

DESPEC

Fields marked with * are required
Entry time:	Sat Mar 29 11:37:57 2025
Author*:
Subject*:
Attachment 1 - DSSSD bias & leakage current - OK Attachment 2 - ADC data item stats Attachment 3 - FEE64 temps - OK Attachments 4-7 - aida01, 02, 03 & 04 2..W spectra Noise observed for asics #1 & #2 of aida02 consistent with no cable attached - confirmed by visual inspection - ribbon cable disconnected from Samtec header of adaptor PCB To Do list 1) re-connect ribbon cable to aida02 adaptor PCB 2) good quality ground to snout - use screws at inter-stage 3) install heavy duty grounds 4) ... Attachment 8 - adc data item stats - slow comparator 0x64 Attachment 9 - per FEE64 rate spectra - slow comparator 0x64 Attachment 10 - per FEE64 rate spectra - slow comparator 0xa - 13:30 - Attach heavy duty ground to AIDA Attachment 11 - per FEE64 rate spectra - slow comparator 0xa Try power cycle as system ground changed significantly now Try to reattach aida04 TTY connector - still wrong Archive old tty logs (ttyUSB) to zip and delete them, makes easier to track startup Attachment 12 - per FEE64 rate spectra - slow comparator 0xa No major difference, aida01 quieter than before aida05 has some missing channels - loose ERNI? Attachements 13 & 14 - Waveforms Temporarily raise to 0x64 and test merger for DTAS synchro test later... all works good to MBS Change NETVAR MERGE.LinksAvailable to 8 Notice one copper screw touching aluminium, add some kapton tape behind it to isolate it. No difference Voltage diff between aida02,aida06 < 1 mV Voltage diff between copper bars < 0.5 mV (but not 0) A comment from DTAS people that they observed a large increase in noise recently - perhaps from accelerator May indicate current power/gronud oddities? Attachment 15 - Rates at 0x1f (= 310 keV) DSSSD#1 reasonable (aida04 a bit bad), but mostly just pulser (25 Hz) DSSSD#2 much worse esp. p+n sides (aida05, aida07) ERNI connectors pushed in and feel fully in Encoding: HTML ELCode plain Suppress Email notification

Attachment 1:
Drop attachments here...

ELOG V3.1.4-unknown