AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
DESPEC
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 20:13:07 2025
Author
*
:
Subject
*
:
10:26 MACB HDMI for AIDA03 and AIDA04 reseated. Merger and DAQ restarted - All happily sending data Has been running for 10 minutes with no WR errors. Rates from yesterday achieved again. DTAS will move back into position at some point. Once this is done, will perform pulser walkthrough. 11:14 DTAS now back in position for experiment Slight increase in noise noticed across a few FEEs Over time this has decreased on all but AIDA07 which is now running at ~80k - attachment 1 AIDA03 is now however gaining white rabbit errors at a rate of 1 every few minutes. Less frequently gaining FPGA errors 12:20 AIDA power cycle to reseat the HDMI for AIDA03 - It would eventually crash if not done Upon powering up again rates in AIDA08 slightly worse - attachment 2 13:26 No WR errors since the last power cycle. 21:16 Baseline system wide checks, zero histograms & stats All system wide checks OK per p+n FEE64 1.8.L spectra - attachment 3 aida01 pulser peak width 82 channels FWHM per FEE64 rate spectra - attachment 4 adc, pause, resume and correlation scaler data item stats - attachments 5-8 FEE64 temps OK - attachment 9 DSSSD bias & leakage currents OK - attachments 10 & 11
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown