AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
DESPEC
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 11:24:07 2025
Author
*
:
Subject
*
:
> 10:26 MACB HDMI for AIDA03 and AIDA04 reseated. > Merger and DAQ restarted - All happily sending data > Has been running for 10 minutes with no WR errors. > Rates from yesterday achieved again. > > DTAS will move back into position at some point. > Once this is done, will perform pulser walkthrough. > > > 11:14 DTAS now back in position for experiment > Slight increase in noise noticed across a few FEEs > Over time this has decreased on all but AIDA07 which is now running at ~80k - attachment 1 > AIDA03 is now however gaining white rabbit errors at a rate of 1 every few minutes. > Less frequently gaining FPGA errors > > 12:20 AIDA power cycle to reseat the HDMI for AIDA03 - It would eventually crash if not done > Upon powering up again rates in AIDA08 slightly worse - attachment 2 > > 13:26 No WR errors since the last power cycle. > > 21:16 Baseline system wide checks, zero histograms & stats > > All system wide checks OK > > per p+n FEE64 1.8.L spectra - attachment 3 > aida01 pulser peak width 82 channels FWHM > > per FEE64 rate spectra - attachment 4 > > adc, pause, resume and correlation scaler data item stats - attachments 5-8 > > FEE64 temps OK - attachment 9 > > DSSSD bias & leakage currents OK - attachments 10 & 11
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown