AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
DESPEC
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 20:13:04 2025
Author
*
:
Subject
*
:
11:19 Stats ok 0xa on all FEE - attachment 1 Current pulser settings - attachment 2 FEE Temperatures ok - attachment 3 Noticed both AIDA03 and AIDA07 had ASICs with missing channels. Did a check ASIC control on them to recover Layout 1 after recovering channels - attachment 4 New stats (Note increased rate on 3 and 7) attachment 5 Bias and leakage currents ok - attachment 6 S4 now in closed access. Trying to find out if the beam dump has been put in front of AIDA. Will make sure this is checked before beam to S4. 14:05 Have had it confirmed that the flange beam dump is in position in S4 15:43 Stats ok -attachment 7 Temp ok - attachment 8 Bias and Leakage current ok - attachment 9 17:45 Currently the time machine trigger(for correlation) is connected to the DTAS or. As the beam is tuning they are triggering at 150k. This is 450k worth of scalers in AIDA During the experiment this will be changed to SC1 trigger to solve this. 19:49: Stats ok - attachment 10 temperatures ok - attachment 11 Bias - Leakage current ok - attachment 12
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown