ELOG DESPEC

AIDA GELINA BRIKEN nToF CRIB ISOLDE CIRCE nTOFCapture DESPEC DTAS EDI_PSA 179Ta CARME StellarModelling DCF K40

DESPEC

Fields marked with * are required

Entry time:

Tue Jun 21 10:19:05 2022

Author*:

Subject*:

11:19 Stats ok 0xa on all FEE - attachment 1
      Current pulser settings - attachment 2
      FEE Temperatures ok - attachment 3
      Noticed both AIDA03 and AIDA07 had ASICs with missing channels. Did a check ASIC control on them to recover
      Layout 1 after recovering channels - attachment 4
      New stats (Note increased rate on 3 and 7) attachment 5
      Bias and leakage currents ok - attachment 6

S4 now in closed access. Trying to find out if the beam dump has been put in front of AIDA. Will make sure this is checked before beam to S4.

14:05 Have had it confirmed that the flange beam dump is in position in S4

15:43 Stats ok -attachment 7
      Temp ok - attachment 8
      Bias and Leakage current ok - attachment 9

17:45 Currently the time machine trigger(for correlation) is connected to the DTAS or.
      As the beam is tuning they are triggering at 150k. This is 450k worth of scalers in AIDA
      During the experiment this will be changed to SC1 trigger to solve this.

19:49: Stats ok - attachment 10
       temperatures ok - attachment 11
       Bias - Leakage current ok - attachment 12

Encoding: HTML ELCode plain
Suppress Email notification Resubmit as new entry

Attachment 1: