AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
DESPEC
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 11:26:28 2025
Author
*
:
Subject
*
:
> 11:19 Stats ok 0xa on all FEE - attachment 1 > Current pulser settings - attachment 2 > FEE Temperatures ok - attachment 3 > Noticed both AIDA03 and AIDA07 had ASICs with missing channels. Did a check ASIC control on them to recover > Layout 1 after recovering channels - attachment 4 > New stats (Note increased rate on 3 and 7) attachment 5 > Bias and leakage currents ok - attachment 6 > > S4 now in closed access. Trying to find out if the beam dump has been put in front of AIDA. Will make sure this is checked before beam to S4. > > 14:05 Have had it confirmed that the flange beam dump is in position in S4 > > 15:43 Stats ok -attachment 7 > Temp ok - attachment 8 > Bias and Leakage current ok - attachment 9 > > > 17:45 Currently the time machine trigger(for correlation) is connected to the DTAS or. > As the beam is tuning they are triggering at 150k. This is 450k worth of scalers in AIDA > During the experiment this will be changed to SC1 trigger to solve this. > > 19:49: Stats ok - attachment 10 > temperatures ok - attachment 11 > Bias - Leakage current ok - attachment 12
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown