AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
DESPEC
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 11:41:56 2025
Author
*
:
Subject
*
:
17.00 FEE64 41:a0:71 ASIC #2 u/s Replaced ASIC mezzanine with new ASIC mezzanine Installed as aida04 Unable to boot nnrpi2 - manual/local control of BNC PB-5 and FEE64 PSU - no interlock Water temperature & pressure as measured outside S4 area - OK Manually power FEE64s BNC PB-5 local control/ON Amplitude 1.0V Attenuation x10 Polarity - tau_d 1ms Frequency 22Hz FEE64 temps OK - attachment 1 All system wide checks OK WR timestamp OK - attachment 2 aida04 ASIC settings - attachment 3 ADC data item stats OK - attachment 4 aida04 Rate spectrum - attachment 5 aida04 *.*.L spectra - attachments 6-9 1.8.L pulser peak width 15 ch FWHM aida04 1.8.W spectra - 20us FSR - attachment 10-11 MIDAS configuration - attachment 12 DHCP config - attachment 13 18.30 FEE64 41:f6:b7 ASIC #1 u/s Replaced ASIC mezzanine with new ASIC mezzanine Installed as aida02 All system wide checks OK FEE64 temps - attachment 14 aida02 ASIC temperature c. 512 deg C ! PSU/Virtex temps OK Mezzanine ambient to touch - assume faulty sensor/poor connection? aida02 ASIC settings - attachment 15 WR timestamp OK - attachment 16 ADC data item stats OK - attachment 4 aida04 Rate spectrum - attachment 18 aida02 1.8.W spectra - 20us FSR - attachment 19-20 aida02 *.*.L spectra - attachments 21-24 1.8.L pulser peak width 16 ch FWHM 19.30 Power OFF
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown