AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
DESPEC
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 11:26:46 2025
Author
*
:
Subject
*
:
> > 17.00 FEE64 41:a0:71 ASIC #2 u/s > Replaced ASIC mezzanine with new ASIC mezzanine > Installed as aida04 > > Unable to boot nnrpi2 - manual/local control of BNC PB-5 and FEE64 PSU - no interlock > > Water temperature & pressure as measured outside S4 area - OK > > Manually power FEE64s > > BNC PB-5 local control/ON > Amplitude 1.0V > Attenuation x10 > Polarity - > tau_d 1ms > Frequency 22Hz > > FEE64 temps OK - attachment 1 > > All system wide checks OK > > WR timestamp OK - attachment 2 > > aida04 ASIC settings - attachment 3 > > ADC data item stats OK - attachment 4 > > aida04 Rate spectrum - attachment 5 > > aida04 *.*.L spectra - attachments 6-9 > 1.8.L pulser peak width 15 ch FWHM > > aida04 1.8.W spectra - 20us FSR - attachment 10-11 > > MIDAS configuration - attachment 12 > > DHCP config - attachment 13 > > > > 18.30 FEE64 41:f6:b7 ASIC #1 u/s > Replaced ASIC mezzanine with new ASIC mezzanine > Installed as aida02 > > All system wide checks OK > > FEE64 temps - attachment 14 > aida02 ASIC temperature c. 512 deg C ! > PSU/Virtex temps OK > Mezzanine ambient to touch - assume faulty sensor/poor connection? > > aida02 ASIC settings - attachment 15 > > WR timestamp OK - attachment 16 > > ADC data item stats OK - attachment 4 > > aida04 Rate spectrum - attachment 18 > > aida02 1.8.W spectra - 20us FSR - attachment 19-20 > > aida02 *.*.L spectra - attachments 21-24 > 1.8.L pulser peak width 16 ch FWHM > > > 19.30 Power OFF > > > >
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown