09.56 DAQ continues data file S100_alpha/R18_122
      FRS setting 162Eu

      DSSSD bias & leakage current OK - attachments 1-2

      FEE64 temperatures OK  - attachment 3
       aida02 ASIC temp - known fault

      All system wide checks OK *except* as shown - attachments 4-6

      WR timestamps OK - attachment 7

      ASIC settings aida01 & aida02 - attachments 8-9

      ADC, DISC, PAUSE, RESUME, WR & Correlation Scaler data time stats - attachments 10-15

      per FEE64 Rate spectra - attachments 16-18
       unusually can observe HEC Rates esp. in DSSSD #1 

      per p+n FEE64 1.8.L spectra - attachments 19-21
       aida09 pulser peak width 61 ch FWHM 
       common x/y scale => peak height proxy for width => all p+n FEE64s similar pulser peak widths

      per n+n FEE64 1.8.L spectra - attachment 22

      per FEE64 1.8.H spectra - attachments 23-24

      per FEE64 1.8.W spectra - 20us FSR - attachments 25-26
       only aida08 & aida09 currently updating - ASIC check load and/or DAQ STOP/GO required?

      Merger, TapeServer etc - attachments 27-28

      ucesb - attachments 29-30
       spill cycle reported as 3.5s, extraction 1.5s

10.36 All histograms & stats zero'd

      BNC PB-5 settings - attachment 31

      DSSSD bias & leakage current - Grafana Alerting - attachment 32
       can observe bias & leakage current in greater detail
       DSSSD #1 bias stable, c. 10s nA micro structure observed in leakage current
       DSSSD #2 bias c. 10mV variations, micro structure observed in leakage current but smaller variations cf. DSSSD#1

10.46 analysis of data file R18_131
      max dead time 12% aida04, 6% aida02, all others 0.1% or less
      no timewarps
      HEC data item rates 1.6kHz - correcting for spill cycle => 2.3kHz in spill (online analysis shows no HEC events observed outside spill)
      assume typical HEC event multiplicity = 3 => implant rate ~ 760Hz in spill or 2700 implants per spill
      SC42 L/R currently report c. 2kHz