| <p>Encore un matin, un matin pour ..... a shift !!!ramping up again ! S4 temperature not really going down either: 25C</p>
<p>0:40 AIDA04 is down. I informed the DAQ shift crew and attempting to restart AIDA04.</p>
<p>After rebooting AIDA04 all seemed going until I reached the merger check. No data was being merged.</p>
<p>I realise then that AIDA01 data transfer was not active. I did not spot it when I enabled the data transfer for all.</p>
<p>I stopped the daq and rebooted AIDA01 following all the instructions in the ELOG and this worked.</p>
<p>We are now back in business with AIDA back in main DAQ at 01:40</p>
<p>01:45 full checks:</p>
<p> Bias: AIDA-Graphana - Attachment 1</p>
<p> Leakage current ramping up again ! S4 temperaturenot really going down either: 25C</p>
<pre>
FEE64 temperatures OK - attachment 2
ADC data item stats - attachment 3
per FEE64 Rate spectra - attachment 4
Merger etc - attachment 5
ucesb - attachment 6</pre>
<p>03:00 full checks</p>
<p> No change to be highlighted. All pretty much the same as during previous full checks.</p>
<p>05:00 full checks</p>
<p>Expt still running very smoothly.</p>
<p> Bias: AIDA-Graphana - Attachment 7-8</p>
<p> Leakage current going down slightly</p>
<pre>
FEE64 temperatures OK - attachment 9
ADC data item stats - attachment 10
ramping up again ! S4 temperaturenot really going down either: 25C
per FEE64 Rate spectra - attachment 11
Merger etc - attachment 12
ucesb - attachment 13</pre>
<p>07:15 all running smoothly.</p>
<p>07:20 Spoke too fast AIDA DAQ is down. DAQ shift crew informed.</p>
<p>07:40: AIDA10 was rebooted successfully and AIDA is now back in the main DAQ.</p>
<p> </p> |