AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
DESPEC
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 11:38:57 2025
Author
*
:
Subject
*
:
<p>Noise seemed less strong today, unsure of cause. I had re-taped snout as tape was not sticking well.</p> <p>Figures 1-4: Waves for all 4 FEEs connected to the DSSD<br /> Figures 5-8: Zoomed in on region 400-600<br /> Figures 9-10: Rates in DSSD</p> <p>Note in particular fee09 has a clear noise pickup somewhere. Also appears when no DSSD voltage.<br /> Peak distance = 6 channels = 16.6 MHz.</p> <p>Fee09 is connected to HV bias core (-160 V)<br /> However unplugging the HV cable from it shows no difference.</p> <p>Must be related to something else.</p> <p>Update 16:29 CEST:<br /> Distance is more like 5 channels (20 MHz)<br /> Fee09 picks it by far most strongly but all fees you can make it out<br /> Additionally can see a slower waveform especially on other fees... approximately 40 channels = 2.5 MHz</p> <p>Checked with multimeter that low resistance path between FEE cooling plate and ground LEMO connector<br /> also low resistance between ribbon cable copper shield and ground LEMO connector.</p> <p>Noise seems to appear even if pulser cable unplugged at pulser end or when attentuation is increased weaking pulse.</p> <p> </p>
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown