AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
DESPEC
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Thu Jan 9 17:36:50 2025
Author
*
:
Subject
*
:
> > LEC fast comparator has been set to 0x2 (200keV) which is *very* low and means the fast comparator will be triggering on noise. > > The *minimum* LEC fast comparator setting should be in the range 0x5 - 0xa (500-1000keV). > > I have set the TapeServer to 'no storage' mode to avoid filling the aida-gsi disk with rubbish. Thanks. From the DESPEC elog.gsi.de/despec/Implantation+Stack/18 "We have made a trigger from the BGO logic and OR64 of the fast discriminator from AIDA. This was sent as a trigger to the bPlast Exploder. This did not work as the FEE64s of AIDA are running into high dead-time and a result are dropping data. This is a problem for the ucesb unpacker as it will quite working if one of the subsystem stops sending data. (@Nic is this correct?) This is indeed what I see as whenever we try to run FAIRROOT the tree builder exits immediately."
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Resubmit as new entry
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown