AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
DESPEC
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Tue Mar 25 20:27:12 2025
Author
*
:
Subject
*
:
14.37 Detector bias & leakage current OK - attachment 1 FEE64 temperatures OK - attachment 2 WR timestamps - attachment 3 aida06 out of sync global clock status - attachment 4 aida06 fails ADC calibration - attachment 5 all fail - probably due to ASIC synchronise *after* ADC calibration WR decoder & FPGA TS status - attachments 6-7 aida06 status 0xd DAQ run control - attachment 8 aida06 undefined => aida06 has rebooted Merger & Tape Server - attachments 9-10 merger, tape server and data transfer have stopped See https://elog.ph.ed.ac.uk/DESPEC/691 aidao06 system console - aida06 rebooted sometime yesterday *** Recovery For FEE64 aida06 *only* DAQ reset DAQ setup For all FEE64s DAQ stop Restart merger, merger setup, merger go Following two merger restart cycles all FEE64s stopped OK Recovery complete All system wide checks OK Disable data transfer, DAQ go per FEE64 rate spectra = attachment 11 aida04 high rates per FEE64 1.8.W spectra - 20us FSR - attachments 12-13 DAQ stop, enable data transfer, DAQ go Merger and server consoles - attachment 14 merger and tape server (no storage mode) running OK but no data transfer to MBS server WR timestamps OK - attachment 15 ADC and DISC data item stats - attachment 16-17 aida04 & aida16 high rates - all others appear to be OK ASIC check load for all aida16 ASICs changes rate from c. 420k to 0 ASIC check load for all aida04 ASICs changes rate from c. 200k to c. 120k 18.00 No data transfer to MBS - nothing useful being donme at the moment - will place system in safe state DAQ stop Detector bias OFF FEE64 power OFF
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown