AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
DESPEC
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Tue Mar 25 20:23:53 2025
Author
*
:
Subject
*
:
> > 18.18 bPlas and BB7 installs complete > Restart AIDA DAQ, Merger, Tape Server and re-test > > per p+n FEE64 1.8.L spectra - attachment 1 > aida09 pulser peak width 69 ch FWHM = 42keV FWHM > > per FEE64 Rate Spectra - attachment 2 > BB18 p+n FEE64s very good/good, n+n FEE64s OK - could be improved > BB7 aida10 p+n asics good, n+n asics 1x good, 1x OK > > per FEE64 1.8.W spectra - 20us FSR - attachments 3-5 > > ADC data item stats - attachment 6 > aida01 aida03 30k, all other BB18 p+n FEE64s < 20k, n+n FEE64s 100/270k > BB7 aida10 19k > > WR timestamps OK - attachment 7 > > Merger, TapeSever etc - attachments 8-9 > disk directpry /TapeData/FEB25 > working OK > > DSSSD bias & leakage current OK - attachment 10 > > System wide checks OK - attachment 11-15 > note global clock status 6 errors reported earlier today have now gone > > FEE64 temperatures OK - attachment 16 > > 18.38 Transition to safe state > > DAQ STOP > disable data transfer 1 > detector bias OFF > FEE64 power OFF > > > Can restart as follows > > 1) FEE64 power ON > 2) DAQ RESET > 3) DAQ SETUP > 4) Enable histogramming > 5) Enable waveforms > 6) Detector bias ON > 7) Restore ASIC settings > 8) ASIC Control > 9) FEE64 temperatures > 10) System wide checks > sync ASIC clocks > 11) FADC control - calibrate ADCS for *all* FEE64s > 12) System wide checks contd. > 13) DAQ GO > 14) Check ADC data item stats > 15) Check WR timestamps > > If all OK can re-connect to Merger/TapeServer as follows > > 1) DAQ STOP > 2) enable data transfer 1 > 3) DAQ GO > > > Can disconnect from Merger/TapeServer as follows > > 1) DAQ STOP > 2) disable data transfer 1 >
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown