AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
DESPEC
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 11:19:21 2025
Author
*
:
Subject
*
:
> > > All 12 FEEs have valid WR Timestamps > > > Had to powercycle aida09 once as before raw readout was displaying upper 12 bits of WR timestamp as 0. Unsure of other method. > > > > > > HDMI cables in aida09 checked and good. > > > > The problem would be the cable , one end or the other. > > I think ( if I recall ) a setup would restart the WR decoder. > > > > I notice you have set the WR info word rate to be quite high , 6123/sec typ, is this intentional ? > > Cable will be replaced once a spare is available. > > Setup did not restart the WR decoder when this problem occurred beforehand - Reset/Setup tried. > > WR rate was chosen by Vic I believe, I am unsure of reasoning myself.
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown