AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
DTAS
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Fri Jun 7 08:47:17 2019
Author
*
:
Subject
*
:
<p>Start: 16:50</p> <p>Stop: 17:28</p> <p>Root: 201906071728_60Co_AIDA_in.root</p> <p>Comment: 60Co source on top of AIDA (red box, key 3). It is positioned on a plastic ruler in the center of the DTAS.</p> <p>File Number Aida: R18 (_0 should not be used, reset of the time stamp was done during this file). R18_1 started at 16:57, last file R18_4</p> <p>File Number DTAS: 245,247</p> <p>201906071650_60Co_AIDA_245.dlt,... 201906071650_60Co_AIDA_247.dlt</p> <p>After checking the shifts in gain, it seems that for most of the detectors the dynode and anode signal moved in the same direction with the exception of detector 13 (dynode and anode do not move</p> <p>equally, so probably there is a cable problem here, probably in the Dynode 13 or preamp problem)</p> <p>Edit 13/06/19 Oscar Hall</p> <p>The low energy channels of AIDA have been gain matched. Attached is the energy plot of the x and y side strops in AIDA.</p>
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Resubmit as new entry
Attachment 1:
201906071728_60Co_AIDA_in.root
Attachment 2:
Screenshot_from_2019-06-07_17-09-21.png
Original size: 1202x704
Attachment 3:
gainMatchSi.png
Original size: 1918x1001
Attachment 4:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown