AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
DTAS
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Wed May 22 07:15:00 2019
Author
*
:
Subject
*
:
<p>Start: 15:15</p> <p>Stop: 15:50</p> <p>Lmd: Cs137_source_AIDA_201905221515_069.dlt ..Cs137_source_AIDA_201905221515_070.dlt</p> <p>Root: 201905221550_137Cs_with_Aida.root</p> <p>Rates: 7.5 kHz (Dyn), 7.8 kHz (Anodes)</p> <p>Comments: 137Cs source with AIDA in, Source CS401, 4763. The source is not centered. It is positioned (the center of the source) at 14.6 cm</p> <p>from the beam side external edge of the frame (lower NaI numbers). The holder is touching the nose of AIDA.</p> <p>The nose of AIDA is 16 cm from the external edge of the frame (down stream). In that position Si # 3 is at the center of the DTAS according to Tom.</p> <p>We have to be very careful when AIDA is moved in. Some of the AIDA flat connector cables are touching the connectors of our NaI cables.</p> <p>Individual rates (kHz), remember the source is not at the center, so we expect assymetry in the counting rates):</p> <p>Dy01 1.1 An01 1.2</p> <p>Dy02 0.35 An02 0.36</p> <p>Dy03 0.97 An03 1.0</p> <p>Dy04 0.34 An04 0.36</p> <p>Dy05 1.1 An05 1.1</p> <p>Dy06 0.4 An06 0.41</p> <p>Dy07 1.0 An07 1.1</p> <p>Dy08 0.37 An08 0.37</p> <p>Dy11 0.27 An11 0.33</p> <p>Dy12 0.15 An12 0.16 </p> <p>Dy13 0.25 An13 0.28</p> <p>Dy14 0.15 An14 0.16</p> <p>Dy15 0.28 An15 0.33</p> <p>Dy16 0.15 An16 0.15</p> <p>Dy17 0.25 An17 0.31</p> <p>Dy18 0.16 An18 0.15</p> <p> </p>
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Resubmit as new entry
Attachment 1:
201905221550_137Cs_with_Aida.root
Attachment 2:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown