AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
DTAS
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Wed May 22 09:01:43 2019
Author
*
:
Subject
*
:
<p>Start: 17:00</p> <p>Stop: 17:40</p> <p>Lmd: Co60_source_AIDA_201905221700_072.dlt ..Co60_source_AIDA_201905221700_074.dlt</p> <p>Root: 201905221740_60co_with_Aida.root</p> <p>Rates: 13.2 kHz (Dyn), 12.6 kHz (Anodes)</p> <p>Comments: 60Co source with AIDA in, red box, CD 395 . The source is not centered. It is positioned (the center of the source) at 14.6 cm</p> <p>from the beam side external edge of the frame (lower NaI numbers). The holder is touching the nose of AIDA.</p> <p>The nose of AIDA is 16 cm from the external edge of the frame (down stream). In that position Si # 3 is at the center of the DTAS according to Tom.</p> <p>We have to be very careful when AIDA is moved in. Some of the AIDA flat connector cables are touching the connectors of our NaI cables.</p> <p>Individual rates (kHz), remember the source is not at the center, so we expect assymetry in the counting rates):</p> <p>Dy01 2.2 An01 2.27</p> <p>Dy02 0.88 An02 0.91</p> <p>Dy03 2.08 An03 2.20</p> <p>Dy04 0.87 An04 0.86</p> <p>Dy05 2.10 An05 2.17</p> <p>Dy06 0.90 An06 0.89</p> <p>Dy07 2.01 An07 2.13</p> <p>Dy08 0.93 An08 0.93</p> <p>Dy11 0.60 An11 0.68</p> <p>Dy12 0.36 An12 0.33</p> <p>Dy13 0.57 An13 0.62</p> <p>Dy14 0.35 An14 0.33</p> <p>Dy15 0.58 An15 0.65</p> <p>Dy16 0.35 An16 0.33</p> <p>Dy17 0.54 An17 0.62</p> <p>Dy18 0.32 An18 0.31</p>
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Resubmit as new entry
Attachment 1:
201905221740_60co_with_Aida.root
Attachment 2:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown