AIDA GELINA BRIKEN nToF CRIB ISOLDE CIRCE nTOFCapture DESPEC DTAS EDI_PSA 179Ta CARME StellarModelling DCF K40
  DTAS, Page 4 of 8  ELOG logo
Entry  Tue Jun 4 06:27:55 2019, A. Algora (++Jorge,++ Alvaro), background with no beam 201906041439_background_AIDA_in.root201906041458_background_AIDA_in.root201906041516_background_AIDA_in.root201906051343_background_AIDA_in.root201906051439_background_AIDA_in.root
Start: 14:25

Stop: 14:39 (partial, no beam, not erased), 14:58 (partial, no beam, not erased), 15:16  (partial, no beam, not erased),

Stop: 14:39 (next day, a new spectrum was added, AIDAGF11)
Entry  Mon May 20 03:18:03 2019, A. Algora, Co and Cs after two days 
We have been running with Co and Cs for the weekend to check the overall stability.

Seems that the detectors did not move too much. Please note that the Ref detector was plugged incorrectly in channel 8

instead of channel 10 of the ancilliary card.  A new run will be done to include the reference detector.
Entry  Mon May 20 06:04:41 2019, A. Algora, Co and Cs short file Screenshot_from_2019-05-20_14-07-24.pngScreenshot_from_2019-05-20_14-14-15.pngScreenshot_from_2019-05-20_14-14-57.pngScreenshot_from_2019-05-20_14-15-39.png
Short file with the strong Co source and Cs source. To test stability
Start:11:32

Stop: 14:04
Entry  Mon May 20 06:31:53 2019, A. Algora, gain correction  
Only a very small correction was needed (at the level of 0.5 V) for the raw spectra of det 6,12,13,17 (raw Dynodes)

New voltages

DET01        │ 599.0 V 1500.0 uA  598.5 V   89.5 uA On                
Entry  Mon May 20 06:55:15 2019, A. Algora, New config file after calibration 
A file with Co and Cs was collected for 10 min

201905201444_137Cs60Co_align.root

after a minimal correction of the voltages (mentioned in the earlier entry). After this a new calibration was performed.
Entry  Mon May 20 07:07:59 2019, A. Algora, Co source (CD 395) 201905201608_60Co.root
Start: 15:10

Stop: 16:08

Positioned in the center, with the source holder.
Entry  Mon May 20 08:15:24 2019, A. Algora, background Screenshot_from_2019-05-20_16-43-50.pngScreenshot_from_2019-05-20_16-45-46.png201905201725_background.root
Start: 16:25

Stop: 17:25

Background in the same conditions as before (right after the Co measurement)
Entry  Mon May 20 09:39:23 2019, A. Algora, Dynode 08 threshold changed 
Dynode 08 threshold was changed from 675 to 790. Now the rate in this detector is fine.

The global rates for the cards (dynodes and anodes) are similar.
Entry  Mon May 20 10:02:43 2019, A. Algora, 60Co again, with better threshold settings 201905202020_60Co.root
Start: 18:06

Stop: 20:20

Rates: 14 kHz (Dynodes) 12.7 kHz (anodes)
Entry  Mon May 20 12:29:05 2019, A. Algora, background 201905210954_background.root20190520_Conf_3.xlsx
Start: 20:30

Stop: 09:54

Lmd: Background_201905202030_046.dlt ...Background_201905202030_051.dlt
Entry  Tue May 21 02:20:26 2019, A. Algora, Cs measurement, Cs401, 4763 201905211126_137Cs.root
Start: 10:25

Stop: 11:26

lmd: Cs137_source_201905211025_052.dl ...Cs137_source_201905211025_053.dlt
Entry  Tue May 21 03:35:10 2019, A. Algora, Background 201905211352_background.root
Start: 11:34

Stop: 13:52

Rates: 1.7 kHz (Dynodes) 2.0 kHz (Anodes)
Entry  Tue May 21 06:12:13 2019, A. Algora, Co again, to have a root file, source CD395 201905211501_60Co.root
Start: 14:11

Stop: 15:01

Lmd: Co60_source_201905211411_055.dlt ...Co60_source_201905211411_058.dlt
Entry  Tue May 21 06:44:18 2019, A. Algora, identified useful sources 
This is a short list of the identified useful sources:

60Co, key 3, red box, CD 395, already used

137Cs, key 8, 4753, CS401, activity ???, already used
Entry  Tue May 21 07:07:36 2019, A. Algora, 22Na, source 700 201905211543_22Na.root
Start: 15:08

Stop: 15:42

Rates: 19 kHz (Dynodes), 16 kHz (anodes)
Entry  Tue May 21 07:50:03 2019, A. Algora, Background 201905211649_background.root
Start: 15:49

Stop: 16:49

Lmd: Background_201905211549_063.dlt
Entry  Tue May 21 08:55:20 2019, A. Algora, 152Eu, source ID 272 201905211746_152Eu.root
Start: 16:56

Stop: 17:46

Rates: 12.6 kHz (dynodes), 12 kHz (anodes)
Entry  Tue May 21 09:52:43 2019, A. Algora, Background 
Start: 17:53

Stop: 18:53

Rates: 1.8 kHz (dynodes),  1.9 kHz (anodes)
Entry  Tue May 21 10:54:24 2019, A. Algora, Background 
Start: 18:55

Stop: 20:01

Lmd: Background_201905211855_068.dlt
Entry  Tue May 21 12:04:10 2019, A. Algora, background without listmode 201905221411_background.root
Start: 20:04

Stop: 14:11

Rates: 1.8 (Dynodes) 2.0 kHz (anodes)
ELOG V3.1.4-unknown