 Thu May 30 06:46:10 2019, A. Algora, Background with beam 
|
Again a new test with the beam on. At the begining the beam was off and it can be noticed.
There is a lead wall after F11 plastic and in the polyethilene block there are two lead bricks to block the beam to AIDA.
201905301448_background_AIDA_in.root |
|
Thu May 30 07:21:41 2019, A. Algora, Background with beam on
|
Start: 15:21
Stop: 16:41
Root: 201905301642_background_AIDA_in.root |
|
Thu May 30 08:43:29 2019, A. Algora, Background no beam
|
Start: 16:43
Stop: 16:56
Root: 201905301656_background_AIDA_in.root |
|
Thu May 30 08:57:34 2019, A. Algora, Background, no beam + beam, file not saved
|
Start: 16:57
Stop:
Comments: first part no beam, but later with beam |
|
Thu May 30 12:08:01 2019, A. Algora, background, dacq restarted before the measurement
|
Start: 20:09
Stop: 10:17
Root: 201905311017_background_AIDA_in.root |
|
Fri May 31 02:41:55 2019, A. Algora, Background, beam on 7x
|
Start: 10:42
Stop: 11:49
Root: 201905311149_background_AIDA_in.root |
|
Fri May 31 06:48:58 2019, A. Algora, T spectra for AIDA and F11 plastics
|
T spectra for AIDAPL and F11PLL and F11PLR are defined from now on. The ancilliary card was not saving the CFD values for all channels.
It was modified in order to have those spectra. A new configuration file will be saved. See in the attachment |
|
Fri May 31 07:03:37 2019, A. Algora, Background, beam on, rates at F11PL and AIDAPL
|
Start: 15:04
Stop: partial (17:43), 201905311743_background_AIDA_in.root (file corrupt again), system will be restarted
Root: |
|
Fri May 31 09:49:08 2019, A. Algora, Backgroun, beam on
|
Start: 17:49
Stop: 22:11
Root: 201905312211_background_AIDA_in.root |
|
Fri May 31 14:17:13 2019, A. Algora, New config file
|
A new config file provided by Jose and Alvaro is loaded
cp 20190531_Conf_JLTAT.xlsx 20190531_Conf_2.xlsx
Comments: I have modified it afterwards to have TAIDAPL, the threshold in E was too high. The TAC_F11R_CryA was also modified. It is shifted |
|
Fri May 31 14:29:34 2019, A. Algora, Background with beam
|
Start: 22:29
Stop: 15:44 (next day)
Root: 201906011544_background_AIDA_in.root |
|
Sat Jun 1 07:59:20 2019, A. Algora, Background, no beam
|
Start: approximate 15:54
Stop: 16:23
Root: 201906011624_background_AIDA_in.root |
|
Sat Jun 1 08:25:47 2019, A. Algora, Background, without and with beam 7x
|
Start: 16:26
Stop: 17:20 (until then no beam),
Root1: 201906011720_background_AIDA_in.root (no beam, saved 17:20), nor erased |
|
Sat Jun 1 10:04:54 2019, A. Algora, background with beam
|
Start: 18:05
Stop: 22:27
Comments: Rate at F7: 3,3 kHz, rate at F11 (according to the in-beam team approx. 2.4 kHz) |
|
Sat Jun 1 14:31:24 2019, A. Algora, Background, beam on
|
Start: 22:32
Stop: 19:18 (next day)
Comments: According to Tom, the number of ligth particles in AIDA is small |
|
Sun Jun 2 11:23:23 2019, A. Algora, Background, beam on
|
Start: 19:24
Stop: 20:27
Root: 201906022028_background_AIDA_in.root |
|
Sun Jun 2 12:31:45 2019, A. Algora, Background, beam on
|
Start: 20:32
Stop: 09;44
Root: 201906030944_background_AIDA_in.root |
|
Mon Jun 3 01:45:31 2019, A. Algora, Background, no beam for a period
|
Start: 09:45
Stop (partial save): 09:55, 10:00, 10:14,10:29,10:37,10:46
Root: 201906030955_background_AIDA_in.root (no beam, not erased), 201906031000_background_AIDA_in.root (no beam, not erased), |
|
Mon Jun 3 03:37:10 2019, A. Algora, Background, beam on
|
Start:11:36
Stop: 20:47
Root: 2019060312047_background_AIDA_in.root |
|
Mon Jun 3 12:56:06 2019, A. Algora, New configuration file
|
The E range of the AIDA plastic for the construction of the TAIDA plastic spectrum has been changed. Also the range of the TAC_AIDAPL_CryA has been changed.
The estimated range of AIDA was based on the file 201906011624_background_AIDA_in.root, which was with no beam. But I am not sure is the calibration
of |