AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
EDI_PSA
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sun Jun 11 09:18:23 2023
Author
*
:
Subject
*
:
<p>When opening LNL4 target jar, the valve did not sound as if air was entering it: we suspect the target was actually not properly under vacuum.</p> <p>We mounted LNL4 target. However, we could not start the measurement because of bad vacuum. Cold trap was warm. We did several N2 washings to get rid of any residual humidity in the beam line.</p> <p>We had to dismount the target and do several tests with the leak finder before finding out that the problem was a broken O-ring between target and target holder AND damaged chiller's tube valve on target holder.</p> <p>As a consequence, the target was exposed to air for quite some time. No visible degradation. Some pictures are attached.</p> <p>We finally started the scan: details in the excel sheet. Target seems to have withstood air humidity!</p>
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Resubmit as new entry
Attachment 1:
lnl4_before1.jpg
Original size: 2583x2239
Attachment 2:
lnl4_before2.jpg
Original size: 2596x2667
Attachment 3:
Lnl4_before3.jpg
Original size: 2600x2674
Attachment 4:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown