Network configuration files for workstation w26 (Sun Ultra 45)

serial # 0743TFC0DQ
host ID # 840e6006
MAC address 0:14:4f:e:60:6

The MIDAS DAQ configured to use ppc1 (MVME 2431 CPU) connected
to w26 via port 1 (/dev/bge1)

#
# Internet host table
#
#
# Merged entries from ipnodes into hosts on <Wednesday April  2 18:57:41 BST 2008>
# Backup files saved in /etc/inet/ directory: hosts.premerge, ipnodes.premerge
#
127.0.0.1	localhost	
129.215.73.26	w26	loghost	egmsg
192.168.1.25    w26daq
192.168.1.1     ppc0            # TUDA Motorola MVME 2431 CPU
192.168.1.2     ppc1            #
192.168.1.3     ppc2            #
192.168.1.4     ppc3
192.168.1.5     ppc4
192.168.1.6     ppc5
192.168.1.7     ppc6

08:00:3e:2b:59:76       ppc0    # TRIUMF, TUDA
00:01:af:0b:11:22       ppc1    # HIE-ISOLDE, CERN
00:01:af:0b:10:7a       ppc2    # u/s
00:01:af:09:86:88       ppc3    # GELINA, JRC IRMM 
00:01:af:08:2c:38       ppc4
00:01:af:09:df:db       ppc5    # Edinburgh
00:01:af:09:86:83       ppc6    # u/s

#
# The netmasks file associates Internet Protocol (IP) address
# masks with IP network numbers.
# 
# 	network-number	netmask
#
# The term network-number refers to a number obtained from the Internet Network
# Information Center.
#
# Both the network-number and the netmasks are specified in
# "decimal dot" notation, e.g:
#
# 		128.32.0.0 255.255.255.0
#
129.215.72.0	255.255.252.0
192.168.1.0     255.255.255.0

#
# Copyright 2006 Sun Microsystems, Inc.  All rights reserved.
# Use is subject to license terms.
#
# ident	"@(#)nsswitch.files	1.14	06/05/03 SMI"

#
# /etc/nsswitch.files:
#
# An example file that could be copied over to /etc/nsswitch.conf; it
# does not use any naming service.
#
# "hosts:" and "services:" in this file are used only if the
# /etc/netconfig file has a "-" for nametoaddr_libs of "inet" transports.

passwd:     files
group:      files
hosts:      files
ipnodes:    files
networks:   files
protocols:  files
rpc:        files
ethers:     files
netmasks:   files
bootparams: files
publickey:  files
# At present there isn't a 'files' backend for netgroup;  the system will 
#   figure it out pretty quickly, and won't use netgroups at all.
netgroup:   files
automount:  files
aliases:    files
services:   files
printers:	user files

auth_attr:  files
prof_attr:  files
project:    files

tnrhtp:     files
tnrhdb:     files

w26

w26daq

129.215.75.254

#	Place share(1M) commands here for automatic execution
#	on entering init state 3.
#
#	Issue the command '/etc/init.d/nfs.server start' to run the NFS
#	daemon processes and the share commands, after adding the very
#	first entry to this file.
#
#	share [-F fstype] [ -o options] [-d "<text>"] <pathname> [resource]
#	.e.g,
#	share  -F nfs  -o rw=engineering  -d "home dirs"  /export/home2

share -F nfs -o rw=np-suns /scratch
share -F nfs -o rw=ppc1,root=ppc1 /MIDAS

rpcbind: 192.168.1.0/255.255.255.0
in.tftpd: 192.168.1.0/255.255.255.0
rpcbind: 129.215.72.0/255.255.252.0 
rpcbind: 255.255.255.255 0.0.0.0
sshd: .gsi.de .ed.ac.uk .dl.ac.uk .cern.ch @np-suns

ALL: ALL: spawn (/usr/sfw/sbin/safe_finger -l @%h | /bin/mailx -s %d-%h td) &: DENY