AIDA GELINA BRIKEN nToF CRIB ISOLDE CIRCE nTOFCapture DESPEC DTAS EDI_PSA 179Ta CARME StellarModelling DCF K40
  ISOLDE  ELOG logo
Message ID: 45     Entry time: Wed Nov 8 17:12:01 2017
Author: TD 
Subject: MIDAS logs 
Attachment 1 - snoop -d bge1 log following MVME CPU reset

Attachment 2 - VME CPU system console

Fixed MVME2354 CPU RPC timeout when mounting MIDAS filesytem (see attachment 2)
by changing Sun workstation name services configuration file /etc/nsswitch.conf
to remove dns i.e. from

hosts: files dns
ipnodes: files dns

to

hosts: files
ipnodes: files

*Why* this works is a good question ...
Attachment 1: snoop.log  53 kB  | Show | Hide all | Show all
Attachment 2: vmecpu.log  2 kB  | Hide | Hide all | Show all
Copyright Motorola Inc. 1988 - 1999, All Rights Reserved

PPC4 Debugger/Diagnostics Release Version 1.2 - 02/15/99 RM01
COLD Start

Local Memory Found =10000000 (&268435456)

MPU Clock Speed =350Mhz

BUS Clock Speed =100Mhz

Reset Vector Location  : ROM Bank B
Mezzanine Configuration: Single-MPU
Current 60X-Bus Master : MPU0
Idle MPU(s)            : NONE

System Memory: 256MB, ECC Enabled (ECC-Memory Detected)
L2Cache:       1024KB, 140Mhz


SelfTest/Boots about to Begin... Press <BREAK> at anytime to Abort ALL

NetBoot about to Begin... Press <ESC> to Bypass, <SPC> to Continue

Network Booting from: DEC21143, Controller 0, Device 0
Device Name: /pci@80000000/pci1011,19@e,0:0,0
Loading: lynxos.netboot

Client IP Address      = 192.168.1.2
Server IP Address      = 192.168.1.25
Gateway IP Address     = 0.0.0.0
Subnet IP Address Mask = 255.255.255.0
Boot File Name         = lynxos.netboot
Argument File Name     =

Network Boot File load in progress... To abort hit <BREAK>

Bytes Received =&3457024, Bytes Loaded =&3457024
Bytes/Second   =&864256, Elapsed Time =4 Second(s)
kkprintf_hook called. configured_uart_port e00003f8
Attach to the hardware
Universe Driver Installed
LynxOS POWERPC Version 3.1.0
Motorola PowerPlus board support package
with Enhanced PCI services!
Copyright 1998 Lynx Real-Time Systems Inc.
All rights reserved.

LynxOS (ppc) created Wed Jan 22 14:59:21 GMT 2003

LynxOS Startup: a

Configuring Ethernet interface
dec0 : Successful link on media MII, 100 Mbit Full duplex
dec0 : Successful link on media MII, 100 Mbit Full duplex
TFTP server 192.168.1.25 used, reading from filelist /client/tftplist
Loading file /tftpboot/C0A80102.fstab from server...ok
Loading file /tftpboot/C0A80102.hosts from server...ok
Mounting NFS directories
w26daq:/MIDAS/LynxOS_MCG_Release/3.1.0/ppc on /rootfs rw
rpc: RPC: Timed out
/client/rc.network: /bin/ifconfig: File or directory doesn't exist
Running /net/inetd
/client/rc.network: /net/inetd: File or directory doesn't exist
    failed with exit code 127
Date set to Wed Nov  8 17:53:15 WET 2017
/client/rc: syncer: command not found
/client/rc: touch: command not found
/client/rc: mkdir: command not found
/client/rc: chmod: command not found
ELOG V3.1.4-unknown