Header: 4.7 MeV/u and Empty frame.
Ender: 
====================================================
Run number			: 78
Date				: 10/11
Start time			: 05:18:20
Stop time			: 05:49:43
Trigger rate (MIDAS)            : 2-3 
Blocks written                  : 165
覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧
Run Scalars (approx rates)
0- Ungated                      :  2
1- Gated                        :  2
2- dE                           :  31
3- E                            :  2
4- HI                           :  11
5- Pulser                       :  2
6- Clock                        :  967
覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧
Beam energy			: 4.7 MeV/u
Beam intensity		        : ~2.0 pA (at the end maybe ~1.7 pA)
Target				: Empty frame  (Pos#7)
Ladder position		        : 52.09
HI Degrader foil (um)           : 15 um Al
覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧
del_E voltage (V)		: -32 
del_E leakage (uA)		: 0.8 
E voltage (V)			: -350 
E leakage (uA)	                : 1.75
E_hi voltage (V)		: -13.5 to -14 
E_hi leakage (uA)		: 0.895 
覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧
PA power (upstream, positive)   : 1.55 A 
PA power (upstream, negative)   : -0.55 A
PA power (downstream, positive) : 0.8 A
PA power (downstream, negative) : -0.28 A 
覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧
Pressure (IMG1)		        : 6.8E-06
Pressure (old gauge)	        : 1.9E-05
Pressure (SEC)	           	: 3.9E-06
覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧
Temp (Chiller)		        : -10.0
Temp (chamber)		        : 5.6
覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧
Comments: scaler on HI-det: around 10 --> prescaler = 0. Thats why only E trigger. Check if trigger technique
also suits empty frame runs.
          see few dE versus E event --> scattered on target frame (I guess)

====================================================