Header: 3.99 MeV/u and CH2_30+25.
Ender: primary target current (RED) down to 5V... 
====================================================
Run number			: 85
Date				: 11/11
Start time			: 01:23:45
Stop time			: 02:14
Trigger rate (MIDAS)            : 3-4 
Blocks written                  : 18
覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧
Run Scalars (approx rates)
0- Ungated                      : 3 
1- Gated                        : 3
2- dE                           : 109k
3- E                            : 102 
4- HI                           : 624
5- Pulser                       : 2 
6- Clock                        : 968 
覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧
Beam energy			: 3.99 MeV/u
Beam intensity		        : 1.7 - 2.0 pA
Target				: CH2_30+25  (Pos#6; 490-520 ug/cm2)
Ladder position		        : 67.26
HI Degrader foil (um)           : 10 um Al
覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧
del_E voltage (V)		: -40 
del_E leakage (uA)		: 0.61 
E voltage (V)			: -350 
E leakage (uA)	                : 2.125
E_hi voltage (V)		: -14 
E_hi leakage (uA)		: 2.4
覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧
PA power (upstream, positive)   : 1.55 mA 
PA power (upstream, negative)   : -0.55 mA
PA power (downstream, positive) : 0.8 mA
PA power (downstream, negative) : -0.28 mA 
覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧
Pressure (IMG1)		        : 8.6E-06 mbar
Pressure (old gauge)	        : 2.7E-05 mbar
Pressure (SEC)	           	: 4.7E-06 mbar
覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧
Temp (Chiller)		        : -10.0 degrees C
Temp (chamber)		        : 5.8 degrees C
覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧
Comments: 
02.14 realized target current was down. Should have happened quite recently.
Interestingly, when target current was down (no Cu-beam) the gated and ungated trigger rate was 0, although
Pulser was 2. Is the pulser somehow excluded from the trigger??


====================================================