October 22th. It's planned to remove the dummy sample on beam. We are planning to measured 4 references samples during the next two days.

- 6LiF #2. The 6LiF is deposited in the backing side. The measurement will be performed by using Al filter, Co - Mo- W and no filters.

- 6LiF #3. The 6LiF is deposited in the backing side. The measurement will be performed by using Al filter, Co - Mo- W and no filters.

-10B #3. The 10B is deposited in the frame side. The measurment will be performed without filters.

-10B #2. The 10B is deposited in the backing side. The measurment will be performed without filters.

For the moment 6 reference samples have been measured.

- 2 x 6LiF. The 6LiF is deposited in the backing side for both samples, #2 and #3. (Backing means the side from where the mylar has been glued)

- 4 x 10B. For the samples #1 and #2 the 10B is deposited in the frame facing the detector, and the samples #3 and #4 the 10B is deposited in the backing side.

During the last days, the two 6LiF samples will be measured, and the samples #2 and #3 samples with 10B.