AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
nToF
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Mon Aug 18 08:56:54 2025
Author
*
:
Subject
*
:
<p>I'm attaching a report for the experimental setup so far.</p> <p>There is a main problem which haven't been solved yet and I don't know if that can cause problem in the future analysis.</p> <p>Channels #23, #24, #31 and #32 are not working well. The signal os these channels look attenuated from the pulser, make impossible to see then in the Boron run.</p> <p>As these channels are in the back side of the detector, it could be possible to run like? Unless we have more ideas about to solve the problem.</p> <p>The front channels work well all of them, and the rest of the back channels work well as well.</p> <p>I attach the current for the +15 and -15 volt applied to the PreAmp (low voltage) and the leakage current from the detector is 0.1 uA.</p>
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown