AIDA GELINA BRIKEN nToF CRIB ISOLDE CIRCE nTOFCapture DESPEC DTAS EDI_PSA 179Ta CARME StellarModelling DCF K40
  AIDA  ELOG logo
Entry  Sun May 29 14:06:31 2016, TD, AE & CG, Sunday 29 May 2016 62.png63.png64.pngcaen_addr0_290616_2244.pngcaen_addr1_290616_2244.png
    Reply  Sun May 29 20:06:15 2016, TD, AE & CG - reply PJCS, Sunday 29 May 2016 
       Reply  Sun May 29 22:35:25 2016, TD, AE & CG - reply PJCS, Sunday 29 May 2016 70.png71.png72.png
          Reply  Sun May 29 23:28:56 2016, TD, AE & CG - reply PJCS, Sunday 29 May 2016 
             Reply  Sun May 29 23:55:15 2016, TD, AE & CG - reply PJCS, Sunday 29 May 2016 80.png81.png82.png83.png84.png
                Reply  Mon May 30 00:01:23 2016, TD, AE & CG - reply PJCS, Sunday 29 May 2016 90.png91.png92.png93.png94.png
                   Reply  Mon May 30 00:07:56 2016, TD, AE & CG - reply PJCS, Sunday 29 May 2016 
Message ID: 251     Entry time: Sun May 29 23:55:15 2016     In reply to: 250     Reply to this: 252
Author: TD, AE & CG - reply PJCS 
Subject: Sunday 29 May 2016 
> > 
> > > > 22.05 nnaida17 ASIC parameters not loading
> > > >       power cycle & reboot
> > > > 
> > > >       nnaida5 (master) clock not locked - status 0x6 - see attachments 1-3
> > > 
> > > I suggest you check the hdmi hasn't been disturbed in the Macb or the FEE64.. Since the others are ok. I
> > suggest it is the cable from the 
> > > Macb 
> > > to the FEE64 #5. If this fails to correct then please send a screen shot of the Local Controls status for
> > nnaida5. 
> > 
> > See enclosed.
> 
> The LMK3200 control register looks wrong.
> Look at another FEE and I think it should be 0x1b

nnaida1-4 LMK03200 control register 0xb cf. nnaida5 0x7
Attachment 1: 80.png  111 kB  | Show | Show all
Attachment 2: 81.png  111 kB  | Show | Show all
Attachment 3: 82.png  111 kB  | Show | Show all
Attachment 4: 83.png  111 kB  | Show | Show all
Attachment 5: 84.png  111 kB  | Show | Show all
ELOG V3.1.4-unknown