16:43  Leakage currents OK - see attachment 1
       FEE64 temperatures OK - see attachment 2
       Statistics show rate increase in nnaida13, 21. Reason unclear - see attachment 3
       Waveforms for nnaida13 look OK - see attachment 4
       No merger errors - see attachment 5

       All system-wide checks OK, except ADC calibration for nnaida1, 8, 19

       Current writing speed 10 Mb/s, 30% higher than before - see attachment 6

       Current AIDA run /TapeData/RIBF128/R5_6

17:50  Leakage currents OK - see attachment 7
       FEE64 temperatures OK - see attachment 8
       Statistics as before - see attachment 9
       No merger errors - see attachment 10

       Analysed /TapeData/RIBF128/R5_25 - attachment 11
       Rate high as expected, no timewarps, negligible dead time, idle time in agreement with dead time


19.34 DAQ starts
      AIDA file RIBF128/R5_58
      BigRIPS file 2088
      BRIKEN file 0

      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency 25Hz range
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Mar27-16.12.39

      130Ag BigRIPS setting, degrader setting - fixed 6mm (in F11) + variable all out = 6 mm Al

19.38 DAQ stops
      AIDA file RIBF128/R5_59

20.04 Detector biases & leakage currents OK - see attachments 12 & 13
      FEE64 Temperatures OK - see attachment 14
      good events statistics OK - see attachment 15
      No warnings/errors reported by merger since DAQ GO - see attachment 16

      *all* system wide checks OK (zero fails)

      analysis of file RIBF128/R5_67 - dead time < 0.5%, no timewarps, 2 MBS timewarps - see attachment 17

20.14 online analysis - ADC & disc data synchronised - see attachment 18

20.28 layout spectra - attachments 19-28
      no pulser peaks observed in p+n junction strip FEE64s - to be checked when access is obtained

21.01 E17/F11 ambient temperature +24.3 deg C, RH 41.0%, d.p. +10.0 deg C
      Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 75%)

21.07 DAQ starts
      AIDA file RIBF128/R5_85
      BigRIPS file 3003
      BRIKEN file 3

      BNC PB-4
      Amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      - polarity
      frequency 25Hz range
      delay MIN, tail pulse, INT ref

      ASIC settings 2017Mar27-16.12.39

      130Ag BigRIPS setting, degrader setting - fixed 2mm Al at F7, fixed 3mm + variable 1mm Al at F11 = 6 mm Al

21.15 DAQ stop
      AIDA file RIBF128/R5_88

21.31 DAQ starts
      AIDA file RIBF128/R5_93
      BigRIPS file 3004
      BRIKEN file 4

      DAQ sync check OK

      All SortSas spectra & histograms zero'd

21.45 DAQ stop
      AIDA file RIBF128/R5_98

21.31 DAQ starts
      AIDA file RIBF128/R5_98
      BigRIPS file 3005
      BRIKEN file 5

22.00 Detector biases & leakage currents OK - see attachments 29 & 30
      FEE64 Temperatures OK - see attachment 31
      good events statistics OK - see attachment 32
      No warnings/errors reported by merger since DAQ GO - see attachment 33

      *all* system wide checks OK (zero fails)

      analysis of file RIBF128/R5_67 - dead time < 0.7%, no timewarps, 1 MBS timewarp - see attachment 34

20.14 online analysis - ADC & disc data synchronised - see attachment 35

22.08 offline analysis file RIBF128/R5_106 - rates

 *** DSSSD # 1 count:    403476 old count:    321247 dt:      1.03 s  LEC rate:  80056.89 Hz
 *** DSSSD # 2 count:    559009 old count:    446189 dt:      1.03 s  LEC rate: 109839.82 Hz
 *** DSSSD # 3 count:    262328 old count:    206447 dt:      1.03 s  LEC rate:  54404.88 Hz
 *** DSSSD # 4 count:    159863 old count:    127957 dt:      1.03 s  LEC rate:  31063.19 Hz
 *** DSSSD # 5 count:     66930 old count:     52878 dt:      1.03 s  LEC rate:  13680.81 Hz
 *** DSSSD # 6 count:    109482 old count:     87597 dt:      1.03 s  LEC rate:  21306.90 Hz
 *** DSSSD # 1 count:         1 old count:         1 dt:      1.03 s  HEC rate:      0.00 Hz
 *** DSSSD # 2 count:        72 old count:        56 dt:      1.03 s  HEC rate:     15.58 Hz
 *** DSSSD # 3 count:       278 old count:       214 dt:      1.03 s  HEC rate:     62.31 Hz
 *** DSSSD # 4 count:       218 old count:       178 dt:      1.03 s  HEC rate:     38.94 Hz
 *** DSSSD # 5 count:        22 old count:        18 dt:      1.03 s  HEC rate:      3.89 Hz
 *** DSSSD # 6 count:        27 old count:        15 dt:      1.03 s  HEC rate:     11.68 Hz

     online analysis - per DSSSD x versus y (HEC) - attachment 36
                       per DSSSD E_p versus E_n (HEC) - attachment 37

     offline analysis file RIBF128/R5_106 - ADC & disc data synchronised - attachment 38
     N.B. pulser to p+n strips appears to be low amplitude - absence of secondary ADC peak, low multiplicity for
disc data


23.01 DAQ stop
      AIDA file RIBF128/R5_124

23.02 DAQ starts
      AIDA file RIBF128/R5_124
      BigRIPS file 3006
      BRIKEN file 6

00:01 DAQ stop
      AIDA file R5_145