|  | 
| AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40 | 
| 
| AIDA |  |  | 
|
| 
| Message ID: 72
    Entry time: Sun Apr 26 02:28:59 2015 |  | | Author: | JA, LHB, TD, AE & CG |  | Subject: | Sunday 26 April 2015 | 
 |  | 
| 
Upstream, 207Bi source
DSSSD #1  nnaida 6  & 9  (p+n), nnaida 11 & 16 (n+n)
DSSSD #2  nnaida 2  & 5  (p+n), nnaida 4  & 7  (n+n)
DSSSD #3  nnaida 1  & 14 (p+n), nnaida 3  & 8  (n+n)
N/C       nnaida 10 & 13 (p+n), nnaida 12 & 15 (n+n)
3x MSL type BB18(DS)-1000 DSSSDs connected via 12x flexible Kapton PCB cables to 8x adaptor PCBs
Hit patterns show attachments 1-16
Default ASIC parameters *except* slow comparator 0x10 -> 0x20
Example ASIC configuration attachment 17
Example 'Good Events' statistics attachment 18
ASIC #1 waveforms of nnaida 1 - 16 enabled
Example waveform for p+n and n+n strips of each DSSSD attachments 19-24
Parameters saved to: /MIDAS/DB/EXPERIMENTS/AIDA/2015Apr26-10.56.40
12.10 Removing bias gnd jumper from p+n adaptor PCBs increases amplitude of ~100kHz RFI/EMI
      (attachment 25)
15.20 Reduce DSSSD configuration to 1x DSSSD using 4x adaptor PCBs + heavy duty copper braid
      DSSSD #2 nnaida 2 & 14 (p+n), nnaida 4 & 7 (n+n)
      attachments 26-33 show example preamp traces and ASIC#1 spectra
      similar stability/performance to previous tests with a single DSSSD, typical pulser
      peak widths ~130-200 ch FWHM
      AIDA snout drain wire - no obvious difference if connected, or not (as before)
15.40 DSSSD configuration 2x DSSSD using 8x adaptor PCBs
      DSSSD #2 nnaida 2 & 14 (p+n), nnaida 4 & 7 (n+n) + heavy duty copper braid
      DSSSD #1 nnaida 6 & 10 (p+n), nnaida 11 & 16 (n+n) + black jumper cables from above adaptor PCBs
      to these adaptor PCBs
      Detector bias from N1419 and N1419B, i.e. separate NIM modules => separate floating grounds
      similar or improved performance to 1x DSSSD test, typical pulser peak widths ~115-250 ch FWHM
16.15 CG smartphone camera pictures of front end config
16.30 data to disk - file /Tapedata/May2015/R3_0.gz (BNC Pb-4 25Hz + 207Bi source)
17.30 Detector bias from N1419, i.e. both detector biases from same NIM module => same floating ground 
      for both DSSSDs
      Similar performance to case above (separate NIM modules) 
17.46 data to disk - file /Tapedata/May2015/R4_0.gz (BNC Pb-4 25Hz + 207Bi source) | 
|  | 
|   | 
|  | 
|   | 
|  | 
|   | 
|  | 
|   | 
|  | 
|   | 
|  | 
|   | 
|  | 
|   | 
|  | 
|   | 
|  | 
|   | 
|  | 
|   | 
|  | 
|   | 
|  | 
|   | 
|  | 
|   | 
|  | 
|   | 
|  | 
|   | 
|  | 
|   | 
|  | 
|   | 
|  | 
|   | 
|  | 
|   | 
|  | 
|   | 
|  | 
|   | 
|  | 
|   | 
|  | 
|  | 
|   | 
|  | 
|   | 
|  | 
|   | 
|  | 
|   | 
|  | 
|   | 
|  | 
|   | 
|  | 
|   | 
|  | 
|   | 
|  | 
|   | 
|  | 
|   |