10.18 DAQ continues OK to file May19/R2

      alpha background

      ASIC settings 2018Oct03-13.26.58
      *except* slow comparator 0xa -> 0x64

      BNC PB-4 Pulser OFF

      all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 1 & 2

      FEE64 temperatures OK - see attachment 3
      good event statistics OK - see attachments 4

      Merger OK - see attachment 5
      TapeServer OK - see attachment 6

      1.8.L spectra - attachments 7 & 8
      1.8.W spectra 20us FSR - attachments 10 & 11
      1.8.W spectra 20ms FSR - attachments 10 & 11

      Julabo FL11006 chiller set point +20 deg C actual +20.0 deg C - water topped up
      Temperature + deg 24.7C dew point +7.5 deg C RH 33.3%

      FEE64 nnaida1-4 temperature logs - see attachments 12-15
      all FEE64 temperatures appear to be stable 

11.05 check ASIC control *all* FEE64s and ASICs

11.13 analysis of file May19/R2_1 - see attachment 16
      ADC rate c. 72Hz dominated by same, single hot channel (Stat spectrum ch# 104) in each of FEE64s nnaida1,
2, 5 & 6 otherwise looks OK
      sync pulser rate 10Hz confirmed by JA

17.25 all system wide checks OK *except* nnaida7 fails ADC calibration

      FEE64 temperatures OK - see attachment 18
      good event statistics OK - see attachments 19

      detector biases & leakage currents OK - see attachment 20

      Temperature + deg 24.5C dew point +8.2 deg C RH 34.1%

      Merger and TapeServer ok