 Sun May 21 02:54:22 2017, CB, TD, OH, Sunday 21 May 10x
|
10.54 DAQ continues OK
Current file May2017/R18_208
ASIC settings 2017Mar27-16.12.39 *except*
slow comparator 0x0a
LEC/MEC fast comparator 0xff
Detector biases; leakage currents OK - see attachment 1
FEE64 Temperatures OK - see attachment 2
good events; statistics OK - see attachment 3
No warnings/errors reported by merger since DAQ GO - see attachment 4
*all* system wide checks OK *except* ADC calibration of nnaida7
10.58 E17/F11 ambient temperature +24.6 deg C, RH 40.5%, d.p. +10.3 deg C
Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 50%)
11.00 DAQ stops OK
Current file May2017/R18_208
Deleted R17*
ASIC settings 2017Mar27-16.12.39 *except*
slow comparator 0x0a
LEC/MEC fast comparator 0xff
BNC PB-4 settings
Amplitude 90,000
x5 attenuator IN
t_r 50ns, tau_d 50us
polarity -
rate 250Hz range
delay MIN, tail pulse
Check ASIC Control x2
Zero all spectra
11.16 DAQ starts
File May2017/R19
Ras Pi system console logs for USB0 attached - see attachment 5
18.26 DAQ continues OK
Current file May2017/R19_77
ASIC settings 2017Mar27-16.12.39 *except*
slow comparator 0x0a
LEC/MEC fast comparator 0xff
Detector biases & leakage currents OK - see attachment 6 & 7
FEE64 Temperatures OK - see attachment 8
good events statistics OK - see attachment 9
No warnings/errors reported by merger since DAQ GO - see attachment 10
*all* system wide checks OK *except* ADC calibration of nnaida7
18.30 E17/F11 ambient temperature +24.7 deg C, RH 38.9%, d.p. +9.8 deg C
Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 60%) |
|
Sat May 20 02:39:06 2017, CB, OH, Saturday 20 May 9x
|
10.35 DAQ continues OK
Current file May2017/R16
ASIC settings 2017Mar27-16.12.39 *except*
slow comparator 0x0a
LEC/MEC fast comparator 0xff
Detector biases; leakage currents OK - see attachment 1
FEE64 Temperatures OK - see attachment 2
good events; statistics OK - see attachment 3
No warnings/errors reported by merger since DAQ GO - see attachment 4
*all* system wide checks OK *except* ADC calibration of nnaida7
10.45 E17/F11 ambient temperature +24.8 deg C, RH 39.9%, d.p. +10.0 deg C
Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 50%)
11.00 DAQ stops OK
Current file May2017/R16
ASIC settings 2017Mar27-16.12.39 *except*
slow comparator 0x0a
LEC/MEC fast comparator 0xff
BNC PB-4 settings
Amplitude 90,000
x5 attenuator IN
t_r 50ns, tau_d 50us
polarity -
rate 250Hz range
delay MIN, tail pulse
Check ASIC Control x2
Zero all spectra
11.10 DAQ starts
File May2017/R17
16.30 DAQ continues OK
Current file May2017/R17
ASIC settings 2017Mar27-16.12.39 *except*
slow comparator 0x0a
LEC/MEC fast comparator 0xff
Detector biases; leakage currents OK - see attachment 5
FEE64 Temperatures OK - see attachment 6
good events; statistics OK - see attachment 7
No warnings/errors reported by merger since DAQ GO - see attachment 8
*all* system wide checks OK *except* ADC calibration of nnaida7
16.45 E17/F11 ambient temperature +24.3 deg C, RH 39.1%, d.p. +9.5 deg C
Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 50%)
16.50 DAQ stops OK
Current file May2017/R17
ASIC settings 2017Mar27-16.12.39 *except*
slow comparator 0x0a
LEC/MEC fast comparator 0xff
BNC PB-4 settings
Amplitude 90,000
x5 attenuator IN
t_r 50ns, tau_d 50us
polarity -
rate 250Hz range
delay MIN, tail pulse
Check ASIC Control x2
Zero all spectra
16.54 DAQ starts
File May2017/R18
Attached Ras Pi system console log for USB0 |
|
Fri May 19 10:16:27 2017, CB, TD, OH, DAQ sever rebooted
|
18:16 Finished rebooting DAQ server and acquisition. All OK, except ADC calibration on #7.
Started run May2017/R16
ASIC settings 2017Mar27-16.12.39 *except*
slow comparator 0x0a
LEC/MEC fast comparator 0xff
Detector biases; leakage currents OK
FEE64 Temperatures OK
good events; statistics OK
No warnings/errors reported by merger since DAQ GO |
|
Fri May 19 09:55:54 2017, CB, TD, OH, Logs from Raspberry Pi System Console
|
17:50 Rebooted Server and FEE64. Connected remotely to Ras Pi System Console. Repeated USB connection procedure. All 24 modules can now be seen. Sample log attached |
|
Fri May 19 02:44:14 2017, TD, CB, OH, Friday 19th May
|
10:44 System wide checks all ok
Leakages and biases all ok (see attachment 1)
Ambient Temperature 24.4C - Humidity 38.1% - Dew Point +9.1
FEE temperatures ok (see attachment 2)
DAQ, Merger and Tape server all still running ok
Good events statistics (see attachment 3)
Orientation of RS-232 cards was wrong. They have now been corrected will enable logging then do a halt and
go on the daq.
Power supply also moved onto AIDA circuit.
11:00 Current file R15_333.
11:04 halt and go performed
24 Log files produced on Rasp Pi console monitor. |
|
Thu May 18 15:20:44 2017, Patrick Coleman-Smith, [HowTo] Connecting a USB console interface to the FEE64
|
The three attachments show the orientation of the console cable pcb relative to the FEE64 connectors.
The first with the other cables and the other two with no cables for clarity of position. |
|
Thu May 18 03:07:47 2017, TD, OH, CB, RasPi system console diagnostics
|
Connecting monitor to RasPi system console diagnostics
May 18 10:59:38 aidas1 dhcpd: DHCPREQUEST for 10.32.6.189 from b8:27:eb:6b:0a:a0 via p2p1: wrong network.
May 18 10:59:38 aidas1 dhcpd: DHCPNAK on 10.32.6.189 to b8:27:eb:6b:0a:a0 via p2p1
May 18 10:59:38 aidas1 dhcpd: DHCPDISCOVER from b8:27:eb:6b:0a:a0 via p2p1
May 18 10:59:39 aidas1 dhcpd: DHCPOFFER on 10.1.1.117 to b8:27:eb:6b:0a:a0 (npg-monitor) via p2p1
May 18 10:59:39 aidas1 dhcpd: Wrote 0 deleted host decls to leases file.
May 18 10:59:39 aidas1 dhcpd: Wrote 0 new dynamic host decls to leases file.
May 18 10:59:39 aidas1 dhcpd: Wrote 44 leases to leases file.
May 18 10:59:39 aidas1 dhcpd: DHCPREQUEST for 10.1.1.117 (10.1.1.250) from b8:27:eb:6b:0a:a0 (npg-monitor) via p2p1
May 18 10:59:39 aidas1 dhcpd: DHCPACK on 10.1.1.117 to b8:27:eb:6b:0a:a0 (npg-monitor) via p2p1
May 18 11:05:46 aidas1 dhcpd: DHCPREQUEST for 10.1.1.117 from b8:27:eb:6b:0a:a0 (npg-monitor) via p2p1
May 18 11:05:46 aidas1 dhcpd: DHCPACK on 10.1.1.117 to b8:27:eb:6b:0a:a0 (npg-monitor) via p2p1
ssh np-monitor -> could not resolve hostname
ssh 10.1.1.117 -> OK
Connecting remotely to RasPi system console diagnostics
http://10.1.1.117:8015/AIDA/Pi_Monitor/Pi_Monitor.tml -> Looks OK (see attached 1)
Connected 24 USB cables. 6 cables per HUB. Connected all HUBs to RasPi. Pressed Update USB terminal list. We see 24
USBs (0-23) (see attached 2)
Pressed Connect USB terminal. Parse USB Log file for details. We can only see ttyUSB0,1,2,3. Full log:
ttyUSB0 => last host=nnaida14, => last addr=193.62.115.227, ; #panics => 0 ; Finished OK
ttyUSB1 => last host=nnlycca4, => last addr=193.62.115.240, ; #panics => 0 ; Finished OK
ttyUSB10 => last => last ; #panics => 0 ; Not Finished
ttyUSB11 => last => last ; #panics => 0 ; Not Finished
ttyUSB12 => last => last ; #panics => 0 ; Not Finished
ttyUSB13 => last => last ; #panics => 0 ; Not Finished
ttyUSB14 => last => last ; #panics => 0 ; Not Finished
ttyUSB15 => last => last ; #panics => 0 ; Not Finished
ttyUSB16 => last => last ; #panics => 0 ; Not Finished
ttyUSB17 => last => last ; #panics => 0 ; Not Finished
ttyUSB18 => last => last ; #panics => 0 ; Not Finished
ttyUSB19 => last => last ; #panics => 0 ; Not Finished
ttyUSB2 => last host=nnaida11, => last addr=193.62.115.232, ; #panics => 0 ; Finished OK
ttyUSB20 => last => last ; #panics => 0 ; Not Finished
ttyUSB21 => last => last ; #panics => 0 ; Not Finished
ttyUSB22 => last => last ; #panics => 0 ; Not Finished
ttyUSB23 => last => last ; #panics => 0 ; Not Finished
ttyUSB3 => last host=nnaida12, => last addr=193.62.115.233, ; #panics => 0 ; Finished OK
ttyUSB4 => last => last ; #panics => 0 ; Not Finished
ttyUSB5 => last => last ; #panics => 0 ; Not Finished
ttyUSB6 => last => last ; #panics => 0 ; Not Finished
ttyUSB7 => last => last ; #panics => 0 ; Not Finished
ttyUSB8 => last => last ; #panics => 0 ; Not Finished
ttyUSB9 => last => last ; #panics => 0 ; Not Finished
ttyUSB0
ttyUSB1
ttyUSB10
ttyUSB11
ttyUSB12
ttyUSB13
ttyUSB14
ttyUSB15
ttyUSB16
ttyUSB17
ttyUSB18
ttyUSB19
ttyUSB2
ttyUSB20
ttyUSB21
ttyUSB22
ttyUSB23
ttyUSB3
ttyUSB4
ttyUSB5
ttyUSB6
ttyUSB7
ttyUSB8
ttyUSB9
Ssh'ed to RasPi. There are only four log files in ~/logs/
sudo lsusb -t results in
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M
|__ Port 1: Dev 2, If 0, Class=hub, Driver=hub/5p, 480M
|__ Port 1: Dev 3, If 0, Class=vend., Driver=smsc95xx, 480M
|__ Port 2: Dev 4, If 0, Class=hub, Driver=hub/4p, 480M
|__ Port 1: Dev 5, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 2: Dev 6, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 3: Dev 7, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 4: Dev 8, If 0, Class=hub, Driver=hub/4p, 480M
|__ Port 1: Dev 9, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 2: Dev 10, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 3: Dev 11, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 3: Dev 20, If 0, Class=hub, Driver=hub/4p, 480M
|__ Port 1: Dev 21, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 2: Dev 22, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 3: Dev 23, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 4: Dev 24, If 0, Class=hub, Driver=hub/4p, 480M
|__ Port 1: Dev 25, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 2: Dev 26, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 3: Dev 27, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 4: Dev 12, If 0, Class=hub, Driver=hub/4p, 480M
|__ Port 1: Dev 13, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 2: Dev 14, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 3: Dev 15, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 4: Dev 16, If 0, Class=hub, Driver=hub/4p, 480M
|__ Port 1: Dev 17, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 2: Dev 18, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 3: Dev 19, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 5: Dev 28, If 0, Class=hub, Driver=hub/4p, 480M
|__ Port 1: Dev 29, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 2: Dev 30, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 3: Dev 31, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 4: Dev 32, If 0, Class=hub, Driver=hub/4p, 480M
|__ Port 1: Dev 33, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 2: Dev 34, If 0, Class=vend., Driver=ftdi_sio, 12M
|__ Port 3: Dev 35, If 0, Class=vend., Driver=ftdi_sio, 12M |
 Thu May 18 09:29:50 2017, TD, OH, CB, RasPi system console diagnostics
|
> Connecting monitor to RasPi system console diagnostics
>
> May 18 10:59:38 aidas1 dhcpd: DHCPREQUEST for 10.32.6.189 from b8:27:eb:6b:0a:a0 via p2p1: wrong network.
> May 18 10:59:38 aidas1 dhcpd: DHCPNAK on 10.32.6.189 to b8:27:eb:6b:0a:a0 via p2p1
> May 18 10:59:38 aidas1 dhcpd: DHCPDISCOVER from b8:27:eb:6b:0a:a0 via p2p1
> May 18 10:59:39 aidas1 dhcpd: DHCPOFFER on 10.1.1.117 to b8:27:eb:6b:0a:a0 (npg-monitor) via p2p1
> May 18 10:59:39 aidas1 dhcpd: Wrote 0 deleted host decls to leases file.
> May 18 10:59:39 aidas1 dhcpd: Wrote 0 new dynamic host decls to leases file.
> May 18 10:59:39 aidas1 dhcpd: Wrote 44 leases to leases file.
> May 18 10:59:39 aidas1 dhcpd: DHCPREQUEST for 10.1.1.117 (10.1.1.250) from b8:27:eb:6b:0a:a0 (npg-monitor) via p2p1
> May 18 10:59:39 aidas1 dhcpd: DHCPACK on 10.1.1.117 to b8:27:eb:6b:0a:a0 (npg-monitor) via p2p1
> May 18 11:05:46 aidas1 dhcpd: DHCPREQUEST for 10.1.1.117 from b8:27:eb:6b:0a:a0 (npg-monitor) via p2p1
> May 18 11:05:46 aidas1 dhcpd: DHCPACK on 10.1.1.117 to b8:27:eb:6b:0a:a0 (npg-monitor) via p2p1
>
>
> ssh np-monitor -> could not resolve hostname
> ssh 10.1.1.117 -> OK
>
> Connecting remotely to RasPi system console diagnostics
>
> http://10.1.1.117:8015/AIDA/Pi_Monitor/Pi_Monitor.tml -> Looks OK (see attached 1)
> Connected 24 USB cables. 6 cables per HUB. Connected all HUBs to RasPi. Pressed Update USB terminal list. We see 24
> USBs (0-23) (see attached 2)
> Pressed Connect USB terminal. Parse USB Log file for details. We can only see ttyUSB0,1,2,3. Full log:
>
> ttyUSB0 => last host=nnaida14, => last addr=193.62.115.227, ; #panics => 0 ; Finished OK
> ttyUSB1 => last host=nnlycca4, => last addr=193.62.115.240, ; #panics => 0 ; Finished OK
> ttyUSB10 => last => last ; #panics => 0 ; Not Finished
> ttyUSB11 => last => last ; #panics => 0 ; Not Finished
> ttyUSB12 => last => last ; #panics => 0 ; Not Finished
> ttyUSB13 => last => last ; #panics => 0 ; Not Finished
> ttyUSB14 => last => last ; #panics => 0 ; Not Finished
> ttyUSB15 => last => last ; #panics => 0 ; Not Finished
> ttyUSB16 => last => last ; #panics => 0 ; Not Finished
> ttyUSB17 => last => last ; #panics => 0 ; Not Finished
> ttyUSB18 => last => last ; #panics => 0 ; Not Finished
> ttyUSB19 => last => last ; #panics => 0 ; Not Finished
> ttyUSB2 => last host=nnaida11, => last addr=193.62.115.232, ; #panics => 0 ; Finished OK
> ttyUSB20 => last => last ; #panics => 0 ; Not Finished
> ttyUSB21 => last => last ; #panics => 0 ; Not Finished
> ttyUSB22 => last => last ; #panics => 0 ; Not Finished
> ttyUSB23 => last => last ; #panics => 0 ; Not Finished
> ttyUSB3 => last host=nnaida12, => last addr=193.62.115.233, ; #panics => 0 ; Finished OK
> ttyUSB4 => last => last ; #panics => 0 ; Not Finished
> ttyUSB5 => last => last ; #panics => 0 ; Not Finished
> ttyUSB6 => last => last ; #panics => 0 ; Not Finished
> ttyUSB7 => last => last ; #panics => 0 ; Not Finished
> ttyUSB8 => last => last ; #panics => 0 ; Not Finished
> ttyUSB9 => last => last ; #panics => 0 ; Not Finished
>
> ttyUSB0
> ttyUSB1
> ttyUSB10
> ttyUSB11
> ttyUSB12
> ttyUSB13
> ttyUSB14
> ttyUSB15
> ttyUSB16
> ttyUSB17
> ttyUSB18
> ttyUSB19
> ttyUSB2
> ttyUSB20
> ttyUSB21
> ttyUSB22
> ttyUSB23
> ttyUSB3
> ttyUSB4
> ttyUSB5
> ttyUSB6
> ttyUSB7
> ttyUSB8
> ttyUSB9
>
> Ssh'ed to RasPi. There are only four log files in ~/logs/
>
> sudo lsusb -t results in
>
> /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M
> |__ Port 1: Dev 2, If 0, Class=hub, Driver=hub/5p, 480M
> |__ Port 1: Dev 3, If 0, Class=vend., Driver=smsc95xx, 480M
> |__ Port 2: Dev 4, If 0, Class=hub, Driver=hub/4p, 480M
> |__ Port 1: Dev 5, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 2: Dev 6, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 3: Dev 7, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 4: Dev 8, If 0, Class=hub, Driver=hub/4p, 480M
> |__ Port 1: Dev 9, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 2: Dev 10, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 3: Dev 11, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 3: Dev 20, If 0, Class=hub, Driver=hub/4p, 480M
> |__ Port 1: Dev 21, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 2: Dev 22, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 3: Dev 23, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 4: Dev 24, If 0, Class=hub, Driver=hub/4p, 480M
> |__ Port 1: Dev 25, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 2: Dev 26, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 3: Dev 27, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 4: Dev 12, If 0, Class=hub, Driver=hub/4p, 480M
> |__ Port 1: Dev 13, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 2: Dev 14, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 3: Dev 15, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 4: Dev 16, If 0, Class=hub, Driver=hub/4p, 480M
> |__ Port 1: Dev 17, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 2: Dev 18, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 3: Dev 19, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 5: Dev 28, If 0, Class=hub, Driver=hub/4p, 480M
> |__ Port 1: Dev 29, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 2: Dev 30, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 3: Dev 31, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 4: Dev 32, If 0, Class=hub, Driver=hub/4p, 480M
> |__ Port 1: Dev 33, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 2: Dev 34, If 0, Class=vend., Driver=ftdi_sio, 12M
> |__ Port 3: Dev 35, If 0, Class=vend., Driver=ftdi_sio, 12M
Can you let me know when you power-cycled the FEEs please ? Or maybe just do a stop/go.
If there is nothing to log from the consoles then the Pi won't have made a log file.
The software opens and closes the log file each time a line of text comes in from the FEE64. |
|
Thu May 18 09:46:36 2017, TD, OH, CB, RasPi system console diagnostics
|
> Can you let me know when you power-cycled the FEEs please ? Or maybe just do a stop/go.
> If there is nothing to log from the consoles then the Pi won't have made a log file.
> The software opens and closes the log file each time a line of text comes in from the FEE64.
The most recent power cycle of the FEE64s was May 5
DAQ stop/go per your request - see Elog https://elog.ph.ed.ac.uk/AIDA/571 |
|
Thu May 18 02:16:05 2017, CB, TD, OH, Thursday 18 May 10x
|
10.10 DAQ continues OK
Current file May2017/R10_346
ASIC settings 2017Mar27-16.12.39 *except*
slow comparator 0x0a
LEC/MEC fast comparator 0xff
Detector biases & leakage currents OK - see attachments 1 & 2
FEE64 Temperatures OK - see attachment 3
'good events' statistics OK - see attachment 4
No warnings/errors reported by merger since DAQ GO - see attachment 5
*all* system wide checks OK
10.20 E17/F11 ambient temperature +24.3 deg C, RH 39.0%, d.p. +9.3 deg C
Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 65%)
10.25 DAQ stops OK
Current file May2017/R13_294
Files May2017/R13* *deleted*
ASIC settings 2017Mar27-16.12.39 *except*
slow comparator 0x0a
LEC/MEC fast comparator 0xff
BNC PB-4 settings
Amplitude 90,000
x5 attenuator IN
t_r 50ns, tau_d 50us
polarity -
rate 250Hz range
delay MIN, tail pulse
Check ASIC Control x2
Zero all spectra
10.30 DAQ starts
File May2017/R14
17.34 DAQ stops OK
Current file May2017/R14_113
Files May2017/R14* *deleted*
ASIC settings 2017Mar27-16.12.39 *except*
slow comparator 0x0a
LEC/MEC fast comparator 0xff
BNC PB-4 settings
Amplitude 90,000
x5 attenuator IN
t_r 50ns, tau_d 50us
polarity -
rate 250Hz range
delay MIN, tail pulse
Check ASIC Control
Zero all spectra
*all* system wide checks OK
17.37 DAQ starts
File May2017/R15
Detector biases & leakage currents OK - see attachments 6 & 7
FEE64 Temperatures OK - see attachment 8
good events statistics - higher rates for several FEE64s - due to addition of system consoles? - see
attachment 9
No warnings/errors reported by merger since DAQ GO - ~ +30% data rate - see attachment 10 |
|
Wed May 17 05:28:19 2017, TD, OH, Wednesday 17 May 6x
|
11.11 DAQ found stopped
Most recent file May2017/R11_245 (last accessed 06:09)
Detector biases & leakage currents OK - see attachments 1 & 2
FEE64 Temperatures OK - see attachment 3
'good events' statistics zero - see attachment 4
Merger and Tapeserver terminal server windows are gone - see attachment 5
*all* system wide checks OK
No relevant system log messages (/var/log/messages) c. 06.00
DAQ STOP attempt #1 did not stop
#2 timeout nnaida1, nnaida2-24 did not stop
#3 timeout nnaida1, nnaida2-24 did not stop
Restart, configure and setup/go merger terminal server
Restart TapeServer terminal server
DAQ STOP attempt #3 all stop OK
11.24 Analysis of data file R11_245 - see attachment 6
dead-time/idle-time < 0.5%
AIDA SYNC100 variations ~160/78000
11.34 E17/F11 ambient temperature +24.5 deg C, RH 37.0%, d.p. +9.0 deg C
Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 65%)
13.06 Check ASIC Control x2
Zero all spectra
Restart terminal servers for Httpd for Merger/TapeServer, Merger & TapeServer
Restart browser for Merger & TapeServer
N.B. *no FEE64 power cycle, no DAQ RESET, SETUP etc*
11.30 DAQ starts
File May2017/R12
13.10 DAQ GO - data transfer links for nnaida11 & nnaida12 dropped
DAQ STOP
Disable all data transfer links
Restart terminal servers for Httpd for Merger/TapeServer, Merger & TapeServer
Restart browser for Merger & TapeServer
Enable all data transfer links
DAQ GO OK
File May2017/R13
ASIC settings 2017Mar27-16.12.39 *except*
slow comparator 0x0a
LEC/MEC fast comparator 0xff |
|
Tue May 16 03:18:46 2017, TD, OH, Tuesday 16 May 9x
|
11.19 DAQ continues OK
Current file May2017/R10_346
ASIC settings 2017Mar27-16.12.39 *except*
slow comparator 0x0a
LEC/MEC fast comparator 0xff
Detector biases & leakage currents OK - see attachments 1 & 2
FEE64 Temperatures OK - see attachment 3
'good events' statistics OK - see attachment 4
No warnings/errors reported by merger since DAQ GO - see attachment 5
*all* system wide checks OK
11.22 Analysis of data file R10_246 - see attachment 6
dead-time/idle-time < 1%
AIDA SYNC100 variations ~700/97000
10.10 E17/F11 ambient temperature +24.5 deg C, RH 38.0%, d.p. +9.4 deg C
Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 65%)
11.23 DAQ stops OK
Current file May2017/R10_347
Files May2017/R10* *deleted*
ASIC settings 2017Mar27-16.12.39 *except*
slow comparator 0x0a
LEC/MEC fast comparator 0xff
BNC PB-4 settings
Amplitude 90,000
x5 attenuator IN
t_r 50ns, tau_d 50us
polarity -
rate 250Hz range
delay MIN, tail pulse
Check ASIC Control x2
Zero all spectra
11.30 DAQ starts
File May2017/R11
18.18 Detector biases & leakage currents OK - see attachments 7 & 8
FEE64 Temperatures OK - see attachment 9
18.24 E17/F11 ambient temperature +24.5 deg C, RH 36.8%, d.p. +8.7 deg C
Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 65%) |
|
Mon May 15 02:01:02 2017, TD, OH, Monday 15 May 7x
|
10.01 DAQ continues OK
Current file May2017/R8_334
ASIC settings 2017Mar27-16.12.39 *except*
slow comparator 0x0a
LEC/MEC fast comparator 0xff
Detector biases & leakage currents OK - see attachments 1 & 2
FEE64 Temperatures OK - see attachment 3
'good events' statistics OK - see attachment 4
No warnings/errors reported by merger since DAQ GO - see attachment 5
*all* system wide checks OK
10.06 Analysis of data file R8_333 - see attachment 6
dead-time/idle-time < 2%
AIDA SYNC100 variations ~1800/95000
10.10 E17/F11 ambient temperature +24.8 deg C, RH 36.4%, d.p. +8.9 deg C
Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 65%)
10.15 DAQ stops OK
Current file May2017/R7_298
Files May2017/R8* *deleted*
ASIC settings 2017Mar27-16.12.39 *except*
slow comparator *0x08*
LEC/MEC fast comparator 0xff
BNC PB-4 settings
Amplitude 90,000
x5 attenuator IN
t_r 50ns, tau_d 50us
polarity -
rate 250Hz range
delay MIN, tail pulse
Check ASIC Control x2
Zero all spectra
10.20 DAQ starts
File May2017/R8
Transient timeouts at DAQ GO for FEE64s nnaida1 and nnaida2 which resolved themselves without user
intervention
DAQ run control transitioned from 'RESET and STOP/GO' to 'RESET' to 'RESET and STOP/GO'
10.22 DAQ stops
File May2017/R9
Tapeserver data rates fluctuate 10-30Mb/s possibly due to parallel disk I/O activity (deleting R8 files)
Transient timeouts at DAQ STOP for FEE64s nnaida1 and nnaida2 which resolved themselves without user
intervention - see attachment 7
DAQ run control transitioned from 'RESET and STOP/GO' to 'RESET' to 'RESET and STOP/GO'
ASIC settings 2017Mar27-16.12.39 *except*
slow comparator *0x0a*
LEC/MEC fast comparator 0xff
10.31 DAQ starts
File May2017/R10 |
|
Sun May 14 01:52:49 2017, TD, OH, Sunday 14 May 16x
|
09.54 DAQ continues OK
Current file May2017/R7_292
ASIC settings 2017Mar27-16.12.39 *except*
slow comparator 0x0a
LEC/MEC fast comparator 0xff
Detector biases & leakage currents OK - see attachments 1 & 2
FEE64 Temperatures OK - see attachment 3
'good events' statistics OK - see attachment 4
No warnings/errors reported by merger since DAQ GO - see attachment 5
*all* system wide checks OK
10.02 Rate/HitRate spectra - see attachments 6 & 7
1.8.L ADC spectra - see attachments 8 & 9
1.8.W waveforms - see attachments 10-13
10.07 Analysis of data file R7_294 - see attachment 14
dead-time/idle-time < 0.5%
AIDA SYNC100 variations ~330/102000
10.17 E17/F11 ambient temperature +25.1 deg C, RH 37.2%, d.p. +9.4 deg C
Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 65%)
10.19 DAQ stops OK
Current file May2017/R7_298
Files May2017/R7* *deleted*
ASIC settings 2017Mar27-16.12.39 *except*
slow comparator 0x0a
LEC/MEC fast comparator 0xff
BNC PB-4 settings
Amplitude 90,000
x5 attenuator IN
t_r 50ns, tau_d 50us
polarity -
rate 250Hz range
delay MIN, tail pulse
Check ASIC Control x2
Zero all spectra
10.22 DAQ starts
File May2017/R8
Analysis of May2017/R8_3 confirms ADC data synchronisation - see attachments 15 & 16 |
|
Sat May 13 03:16:16 2017, TD, Analysis of May2017/R1_0 to May2017/ R1_79 11x
|
See https://elog.ph.ed.ac.uk/AIDA/555
Date files May2017/R1_0 to May2017/R_79 are an extended (c. 3.8 day) background run with
BNC PB-4 Pulser OFF and and a relatively high slow comparator threshold 0x64 to reduce
data volume.
Attachment 1 - DSSSD#1-6 m_p versus m_n
Attachment 2 - DSSSD#1-6 x versus y hit patterns
Attachment 3 - DSSSD#1-6 E_p versus E_n (dispersion ~20-23keV/channel)
Attachment 4 - DSSSD#1-6 E_p versus E_n (with tags)
Attachment 5 - 2D contour levels & colours for all 2D spectra above
Attachment 6 - MIDASsort subroutine
Attachment 7 - MIDASsort namelist I/O variables
Attachments 8-10 - ADC offset calculation logs etc
Attachment 11 - spectrum titles
MIDASsort calculates channel and ADC data as follows
ch = channel + ( module - 1 ) * 64 + ( range * 2048 )
adc_data = INT( RSHIFT( ABS( adc_data - 32768 ), 3 ) - offset(ch) + 0.5 )
where
channel = FEE channel # (0-63)
module = FEE module # (1-24)
range = LEC or HEC (LEC = 0, HEC = 1)
ADC offsets were calculated using the pulser walkthrough data of files May2017/R4
and command
cd ~/td/calibration
offsets /homes/npg/Spectra/R4 100 1400 15 10
where the peakfind peak search parameters are limits 100-1400 channels, fwhm=15 channels and acceptance=10%
Probably ~10% of ADC offsets need manual checking/adjustment
The 2D spectra (attachments 1-4) were produced for events with
multiplicities 0 < m_p < 8 *and* 0 < m_n < 8
all x-y combinations incremented
no clustering, gain matching or software thresholds
All DSSSDs show Uranium 4n+2 decay sequence background spectra from the intrinsic activity of the DSSSDs
and airborne decay products (e.g. 222Rn). Not clear why statistics are higher for DSSSD#1 cf. DSSSD#2-6.
One possibility is the activity of the aluminized Mylar window just upstream of DSSSD#1? Surrounding air
and Al snout would presumably affect DSSSD#1 and #6 about the same. |
|
Sat May 13 02:35:53 2017, TD, OH, Saturday 13 May 17x
|
10.35 DAQ continues OK
Current file May2017/R6_246
ASIC settings 2017Mar27-16.12.39 *except*
slow comparator 0x20
LEC/MEC fast comparator 0xff
Detector biases & leakage currents OK - see attachments 1 & 2
FEE64 Temperatures OK - see attachment 3
'good events' statistics OK - see attachment 4
No warnings/errors reported by merger since DAQ GO - see attachment 5
*all* system wide checks OK
10.46 Rate/HitRate spectra - see attachments 6 & 7
1.8.L ADC spectra - see attachments 8 & 9
1.8.W waveforms - see attachments 10-13
10.51 Analysis of data file R6_245 - see attachment 14
Zero AIDA pause/resume
Zero idle-time
AIDA SYNC100 variations ~33/503400
12.03 E17/F11 ambient temperature +24.6 deg C, RH 39.4%, d.p. +9.9 deg C
Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 65%)
12.04 DAQ stops OK
Current file May2017/R6_250
Files May2017/R6* *deleted*
ASIC settings 2017Mar27-16.12.39 *except*
slow comparator 0x0a
LEC/MEC fast comparator 0xff
BNC PB-4 settings
Amplitude 90,000
x5 attenuator IN
t_r 50ns, tau_d 50us
polarity -
rate 250Hz range
delay MIN, tail pulse
Check ASIC Control x2
Zero all spectra
12.15 DAQ starts
File May2017/R7
14.30 Analysis of May2017/R7_29
ADC data synchronised - see attachments 15 & 16
14.37 Analysis of data file R7_29 - see attachment 17
AIDA pause/resume for some FEE64s
dead-time/idle-time <0.5%
AIDA SYNC100 variations ~300/100000 |
|
Fri May 12 02:55:10 2017, TD, OH, Friday 12 May 6x
|
10.55 DAQ continues OK
Current file May2017/R6_181
ASIC settings 2017Mar27-16.12.39 *except*
slow comparator 0x20
LEC/MEC fast comparator 0xff
Detector biases & leakage currents OK - see attachments 1 & 2
FEE64 Temperatures OK - see attachment 3
'good events' statistics OK - see attachment 4
No warnings/errors reported by merger since DAQ GO - see attachment 5
*all* system wide checks OK
All histograms zero'd
11.04 Analysis of data file R6_180 - see attachment 6
Zero AIDA pause/resume
Zero idle-time
AIDA SYNC100 variations ~22/499760
11.20 E17/F11 ambient temperature +24.6 deg C, RH 39.6%, d.p. +9.9 deg C
Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 65%) |
|
Thu May 11 05:43:30 2017, TD, OH, Thursday 11 May 16x
|
13.43 DAQ continues OK
Current file May2017/R6_123
ASIC settings 2017Mar27-16.12.39 *except*
slow comparator 0x20
LEC/MEC fast comparator 0xff
Detector biases & leakage currents OK - see attachments 1 & 2
FEE64 Temperatures OK - see attachment 3
'good events' statistics OK - see attachment 4
No warnings/errors reported by merger since DAQ GO - see attachment 5
*all* system wide checks OK
13.37 E17/F11 ambient temperature +24.4 deg C, RH 37.3%, d.p. +9.1 deg C
13.58 1.8.L ADC spectra - see attachments 6 & 7
1.8.W waveforms - see attachments 8-11
14.16 Analysis of data file R6_124 - see attachment 12
Zero AIDA pause/resume
Zero idle-time
AIDA SYNC100 variations ~20/468430
18.36 DAQ continues OK
Current file May2017/R6_137
Detector biases & leakage currents OK - see attachments 13 & 14
FEE64 Temperatures OK - see attachment 15
'good events' statistics OK - see attachment 16
*all* system wide checks OK |
|
Wed May 10 02:55:13 2017, TD, OH, Wednesday 10 May 8x
|
10.55 DAQ continues OK
Current file May2017/R6_44
ASIC settings 2017Mar27-16.12.39 *except*
slow comparator 0x20
LEC/MEC fast comparator 0xff
Detector biases & leakage currents OK - see attachments 1 & 2
FEE64 Temperatures OK - see attachment 3
'good events' statistics OK - see attachment 4
No warnings/errors reported by merger since DAQ GO - see attachment 5
*all* system wide checks OK
10.48 E17/F11 ambient temperature +24.7 deg C, RH 35.3%, d.p. +8.3 deg C
Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 65%)
18.32 DAQ continues OK
Current file May2017/R6_67
Detector biases & leakage currents OK - see attachments 6 & 7
FEE64 Temperatures OK - see attachment 8
'good events' statistics OK - see attachment 9
*all* system wide checks OK |
|
Tue May 9 02:25:04 2017, TD, OH, Tuesday 9 May 18x
|
10.25 DAQ continues OK
Current file May2017/R1_79
ASIC settings 2017Mar27-16.12.39 *except*
slow comparator 0x64
LEC/MEC fast comparator 0xff
BNC PB-4 pulser OFF
Detector biases & leakage currents OK - see attachments 1 & 2
FEE64 Temperatures OK - see attachment 3
'good events' statistics OK - see attachment 4
No warnings/errors reported by merger since DAQ GO - see attachment 5
*all* system wide checks OK
10.28 1.8.L ADC spectra - see attachments 6 & 7
1.8.W waveforms - see attachments 8-11
10.43 DAQ stopped
Current file May2017/R1_79
10.48 E17/F11 ambient temperature +24.5 deg C, RH 29.0%, d.p. +5.0 deg C
Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 65%)
10.58 DAQ starts
File May2017/R2 *IGNORE*
Pulser walkthough
BNC PB-4 settings
Amplitude 90,000 - 10,000 @ 10,000 step
x5 attenuator IN
t_r 50ns, tau_d 50us
polarity -
rate ~250Hz
delay MIN, tail pulse
ASIC settings 2017Mar27-16.12.39
Slow comparator 0x0a
See attachment 12
11.02 DAQ starts
File May2017/R3 *IGNORE*
Pulser walkthough
BNC PB-4 settings
Amplitude 12,000 - 2,000 @ 2,000 step
x5 attenuator IN
t_r 50ns, tau_d 50us
polarity -
rate ~250Hz
delay MIN, tail pulse
ASIC settings 2017Mar27-16.12.39
See attachment 13
Pulser walkthroughs R2 & R3 should be ignored as + polarity test input
had significantly lower amplitude (x2 oor more) than - polarity test input.
The + polarity test input is derived from tee'd output from BNC PB-4 and
EG&G Ortec 433 Sum & Invert - physically moving the cabling and connectors
between these two points changed tail pulse amplitude or produced a transient
(non-tail) pulse with duration ~ 100ns. Not clear which cable or connector
is the issue (all cables and connectors were individually replaced) but output
amplitude currently correct so will proceed.
11.22 DAQ starts
File May2017/R4
Pulser walkthough
BNC PB-4 settings
Amplitude 90,000 - 10,000 @ 10,000 step
x5 attenuator IN
t_r 50ns, tau_d 50us
polarity -
rate ~250Hz
delay MIN, tail pulse
ASIC settings 2017Mar27-16.12.39
See attachment 14
11.28 DAQ starts
File May2017/R5
Pulser walkthough
BNC PB-4 settings
Amplitude 12,000 - 2,000 @ 2,000 step
x5 attenuator IN
t_r 50ns, tau_d 50us
polarity -
rate ~250Hz
delay MIN, tail pulse
ASIC settings 2017Mar27-16.12.39
See attachment 15
17.25 E17/F11 ambient temperature +24.7 deg C, RH 28.1%, d.p. +5.0 deg C
Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 65%)
17.32 Detector biases & leakage currents OK - see attachments 16-17
FEE64 Temperatures OK - see attachment 18
17.40 DAQ starts
File May2017/R6
Continuing DAQ test
BNC PB-4 settings
Amplitude 90,000
x5 attenuator IN
t_r 50ns, tau_d 50us
polarity -
frequency 25Hz range
delay MIN, tail pulse
ASIC settings 2017Mar27-16.12.39
slow comparator 0x20 |
|
Mon May 8 10:00:02 2017, Patrick Coleman-Smith, [HowTo] Operating document for the Pi_Monitor FEE64 console logging equipment
|
The operating proceedure for the Raspberry Pi FEE64 console monitor is attached.
Please let me know if more detail is required.
|
|
Mon May 8 02:11:37 2017, OH, TD, Monday 8 May 11x
|
10.11 DAQ continues OK
Current file May2017/R1_58
ASIC settings 2017Mar27-16.12.39 *except*
slow comparator 0x64
LEC/MEC fast comparator 0xff
BNC PB-4 pulser OFF
Detector biases & leakage currents OK - see attachments 1 & 2
FEE64 Temperatures OK - see attachment 3
'good events' statistics OK - see attachment 4
No warnings/errors reported by merger since DAQ GO - see attachment 5
*all* system wide checks OK
10.19 1.8.L ADC spectra - see attachments 6 & 7
1.8.W waveforms - see attachments 8-11
10.35 E17/F11 ambient temperature +24.2 deg C, RH 33.2%, d.p. +7.0 deg C
Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 65%) |
|