ELOG - suspicious clover G7 temp sensor

AIDA GELINA BRIKEN nToF CRIB ISOLDE CIRCE nTOFCapture DESPEC DTAS EDI_PSA 179Ta CARME StellarModelling DCF K40

BRIKEN

Mon Nov 5 09:59:36 2018, MW, KR, suspicious clover G7 temp sensor

Mon Nov 5 18:52:54 2018, MW, KR, suspicious clover G7 temp sensor

Message ID: 414 Entry time: Mon Nov 5 18:52:54 2018 In reply to: 408

Author:	MW, KR
Subject:	suspicious clover G7 temp sensor

Quote:

We observed 6 pm LN2 filling of both clovers on Monday Nov 5th.

D4 went full within reasonable time of below 10 minutes.

Filling of G7 was stopped by "emergency sensor" after about 15 minutes of filling.

Likely the temp sensor at the LN2 overflow pipe of G7 should be changed.

The clock at LN2 fill system is off by about 25 minutes (filling comes later than set at the control unit.)

"The clock at LN2 fill system is off by about 25 minutes (filling comes later than set at the control unit.)"

Yes, This is how it always was.

"Filling of G7 was stopped by "emergency sensor" after about 15 minutes of filling. Likely the temp sensor at the LN2 overflow pipe of G7 should be changed."

You can put this on a different line of the fill system....

ELOG V3.1.4-unknown