| |
ID |
Date |
Author |
Subject |
|
|
279
|
Sat Apr 1 13:15:37 2017 |
JA ID OH PV | Na37 Ne36 Run 064 | Date: 1/04/2017
Start:21:13
BRIKEN run: 63
AIDA Run: R20_302
BigRIPS run: 220
DLT:170401_2015_Na37_063.dlt
BRIKEN Rate: 1.6 cps
F11 Rate: 8. cps
Date: 1/04/2017
Stop: 22:12
BRIKEN run: 63
AIDA Run: R20_315
BigRIPS run: 220
Root file: 170401_2113_2212_B064_Na37.root
OBSERVATIONS: |
|
|
138
|
Tue Nov 8 08:49:51 2016 |
Tain et al | Move ELOG | We will start to use the internal RIKEN ELOG
It is not clear that we can keep the present ELOG also updated |
|
|
16
|
Mon May 4 02:36:16 2015 |
J.Agramunt J.L.Tain K.Gabor | Maki trigger plugged in Mod2 Ch9 | |
|
|
377
|
Sun Oct 21 11:18:31 2018 |
AT & AT | Low threshold, NO pulser, 252Cf, z=0cm | 18/10/21 START: 19:21
18/10/21 STOP: 23:04
252Cf at z=0cm, source axis perpendicular to beam axis, typical orientation.
Pulser is totally disconnected.
Low threshold.
** Configuration file:
181016_Conf_BrikenFull_2153_test_thr.xlsx
ROOT file:
181019_2339_252Cf_z0cm_NOpulser_2304.root
DLT files:
181019_2339_252Cf_z0cm_NOpulser_072.dlt
181019_2339_252Cf_z0cm_NOpulser_073.dlt
181019_2339_252Cf_z0cm_NOpulser_074.dlt
Comment:
- Clovers were placed outside the moderator
- AIDA not inside the moderator.
- Without In beam PE shielding.
**** There is a mistake in the time stamp of the name of the files, it says 181019_2339, it should be
181021_1921. This issue is corrected in the offline files. |
|
|
416
|
Mon Nov 5 21:24:20 2018 |
AT, JR, FM, PA | Low threshold, 252Cf, z=25cm, perpendicular 90 deg | 252Cf at z=25cm, i.e 25 cm from the center of the detector, source axis perpendicular at 90 deg
Low threshold.
18/11/06 START: 06:25
18/11/06 STOP: 07:45
** Configuration file:
181016_Conf_BrikenFull_2153_test_thr.xlsx
ROOT file:
181106_0625_252Cf_z25cm_0745.root
DLT files:
181106_0625_252Cf_z25cm_153.dlt
181106_0625_252Cf_z25cm_154.dlt
Comment:
- Clovers are placed inside the moderator, front face ~5mm from AIDA hole border.
- AIDA not inside the moderator.
- In beam PE shielding placed. |
|
|
413
|
Mon Nov 5 18:05:48 2018 |
AT, JR, FM, PA | Low threshold, 252Cf, z=25cm, perpendicular 0 deg | 252Cf at z=25cm, i.e 25 cm from the center of the detector, source axis perpendicular
Low threshold.
18/11/06 START: 03:18
18/11/06 STOP: 04:39
** Configuration file:
181016_Conf_BrikenFull_2153_test_thr.xlsx
ROOT file:
181106_0318_252Cf_z25cm_0439.root
DLT files:
181106_0318_252Cf_z25cm_148.dlt
181106_0318_252Cf_z25cm_149.dlt
Comment:
- Clovers are placed inside the moderator, front face ~5mm from AIDA hole border.
- AIDA not inside the moderator.
- In beam PE shielding placed. |
|
|
389
|
Thu Oct 25 04:14:00 2018 |
AT & AT | Low threshold, 252Cf, z=25cm, Perpendicular 90deg | 252Cf at z=25cm,ie 25 cm upstream the beam, source axis perpendicular at 90deg with respect to typical
orientation.
Low threshold.
18/10/25 START: 12:13
18/10/25 STOP: 15:42
** Configuration file:
181016_Conf_BrikenFull_2153_test_thr.xlsx
ROOT file:
181025_0213_252Cf_z25cm_1542.root
DLT files:
181025_0213_252Cf_z25cm_106.dlt
Comment:
- Clovers were placed outside the moderator
- AIDA not inside the moderator.
- Without In beam PE shielding.
****** CHECK DATA, possible issue with the clock due to AIDA test. |
| Attachment 1: 181025_0213_252Cf_z25cm.png
|
|
|
|
392
|
Thu Oct 25 09:32:25 2018 |
AT & AT | Low threshold, 252Cf, z=25cm, Perpendicular 90deg | 252Cf at z=25cm,ie 25 cm upstream the beam, source axis perpendicular at 90deg with respect to typical
orientation.
Low threshold.
18/10/25 START: 17:32
18/10/25 STOP: 23:30
** Configuration file:
181016_Conf_BrikenFull_2153_test_thr.xlsx
ROOT file:
181025_1732_252Cf_z25cm_2330.root
DLT files:
181025_1732_252Cf_z25cm_109.dlt
181025_1732_252Cf_z25cm_110.dlt
181025_1732_252Cf_z25cm_111.dlt
181025_1732_252Cf_z25cm_112.dlt
181025_1732_252Cf_z25cm_113.dlt
Comment:
- Clovers were placed outside the moderator
- AIDA not inside the moderator.
- Without In beam PE shielding.
****3He tubes 12 and 7 (RIKEN) were shifted 3cm aprox from their position upstream (CHECK DATA). |
|
|
412
|
Mon Nov 5 16:43:43 2018 |
FM, PA, | Low threshold, 252Cf, z=25cm, Parallel downstream | 252Cf at z=25cm, i.e 25 cm from the center of the detector, source axis parallel downstream
Low threshold.
18/11/06 START: 01:43
18/11/06 STOP: 03:03
** Configuration file:
181016_Conf_BrikenFull_2153_test_thr.xlsx
ROOT file:
181106_0143_252Cf_z25cm_0303.root
DLT files:
181106_0143_252Cf_z25cm_146.dlt
181106_0143_252Cf_z25cm_147.dlt
Comment:
- Clovers are placed inside the moderator, front face ~5mm from AIDA hole border.
- AIDA not inside the moderator.
- In beam PE shielding placed. |
|
|
409
|
Mon Nov 5 12:04:08 2018 |
FM, PA, AT | Low threshold, 252Cf, z=15cm, Perpendicular 0deg | 252Cf at z=15cm,ie center of moderator, source axis perpendicular at 0deg (typical orientation)
Low threshold.
18/11/05 START: 21:05
18/11/05 STOP: 22.30
** Configuration file:
181016_Conf_BrikenFull_2153_test_thr.xlsx
ROOT file:
181105_2105_252Cf_z15cm_2230.root
DLT files:
181105_2105_252Cf_z15cm_137.dlt
181105_2105_252Cf_z15cm_138.dlt
181105_2105_252Cf_z15cm_139.dlt
Comment:
- Clovers are placed inside the moderator, front face ~5mm from AIDA hole border.
- AIDA not inside the moderator.
- In beam PE shielding placed. |
|
|
411
|
Mon Nov 5 15:10:43 2018 |
FM, PA, | Low threshold, 252Cf, z=15cm, Parallel downstream | 252Cf at z=15cm, i.e 15 cm from the center of the detector, source axis parallel downstream
Low threshold.
18/11/06 START: 00:10
18/11/06 STOP: 01:32
** Configuration file:
181016_Conf_BrikenFull_2153_test_thr.xlsx
ROOT file:
181106_0010_252Cf_z15cm_0132.root
DLT files:
181106_0010_252Cf_z15cm_143.dlt
181106_0010_252Cf_z15cm_144.dlt
181106_0010_252Cf_z15cm_145.dlt
Comment:
- Clovers are placed inside the moderator, front face ~5mm from AIDA hole border.
- AIDA not inside the moderator.
- In beam PE shielding placed. |
|
|
384
|
Wed Oct 24 07:42:42 2018 |
AT & AT | Low threshold, 252Cf, z=10cm, source axis parallel | 252Cf at z=10cm, source axis parallel upstream to the beam.
Low threshold.
18/10/24 START: 15:44
18/10/24 STOP: 19:00
** Configuration file:
181016_Conf_BrikenFull_2153_test_thr.xlsx
ROOT file:
181024_1544_252Cf_z10cm_1900.root
DLT files:
181024_1544_252Cf_z10cm_089.dlt
181024_1544_252Cf_z10cm_090.dlt
181024_1544_252Cf_z10cm_091.dlt
Comment:
- Clovers were placed outside the moderator
- AIDA not inside the moderator.
- Without In beam PE shielding. |
|
|
385
|
Wed Oct 24 11:27:51 2018 |
AT & AT | Low threshold, 252Cf, z=10cm, source axis parallel | 252Cf at z=10cm, source axis parallel upstream to the beam.
Low threshold.
18/10/24 START: 15:44
18/10/24 STOP: 19:00
** Configuration file:
181016_Conf_BrikenFull_2153_test_thr.xlsx
ROOT file:
181024_1544_252Cf_z10cm_1900.root
DLT files:
181024_1544_252Cf_z10cm_089.dlt
181024_1544_252Cf_z10cm_090.dlt
181024_1544_252Cf_z10cm_091.dlt
Comment:
- Clovers were placed outside the moderator
- AIDA not inside the moderator.
- Without In beam PE shielding.
******* AT: By mistake duplicated entry from 385. |
|
|
415
|
Mon Nov 5 19:55:20 2018 |
AT, JR, FM, PA | Low threshold, 252Cf, z=0cm, perpendicular 90 deg | 252Cf at z=0cm, i.e 0 cm from the center of the detector, source axis perpendicular at 90 deg
Low threshold.
18/11/06 START:04:56
18/11/06 STOP: 06:16
** Configuration file:
181016_Conf_BrikenFull_2153_test_thr.xlsx
ROOT file:
181106_0456_252Cf_z0cm_0616.root
DLT files:
181106_0456_252Cf_z0cm_150.dlt
181106_0456_252Cf_z0cm_151.dlt
181106_0456_252Cf_z0cm_152.dlt
Comment:
- Clovers are placed inside the moderator, front face ~5mm from AIDA hole border.
- AIDA not inside the moderator.
- In beam PE shielding placed. |
|
|
417
|
Mon Nov 5 22:47:40 2018 |
AT, JR, FM, PA | Low threshold, 252Cf, z=0cm, perpendicular 0 deg | 252Cf at z=0cm, i.e 0 cm from the center of the detector, source axis perpendicular at 0 deg
Low threshold.
18/11/06 START:08:00
18/11/06 STOP: 09:11
** Configuration file:
181030_Conf_BrikenFull_LowThrAdj_masterCLK.xlsx
ROOT file:
181106_0800_252Cf_z0cm_nopulser_0911.root
DLT files:
181106_0800_252Cf_z0cm_nopulser_155.dlt
181106_0800_252Cf_z0cm_nopulser_156.dlt
181106_0800_252Cf_z0cm_nopulser_157.dlt
Comment:
- Pulser OFF, using configuration file 181030_Conf_BrikenFull_LowThrAdj_masterCLK.xlsx
- Clovers are placed inside the moderator, front face ~5mm from AIDA hole border.
- AIDA not inside the moderator.
- In beam PE shielding placed.
- In the online in RateBRIKEN a weird fluctuation is observed (screenshot, attachement 1) |
| Attachment 1: Screenshot_from_2018-11-06_08-32-50.png
|
|
|
|
407
|
Mon Nov 5 09:32:00 2018 |
FM, JR, PA, AT | Low threshold, 252Cf, z=0cm, Perpendicular 0deg | 252Cf at z=0cm,ie center of moderator, source axis perpendicular at 0deg (typical orientation)
Low threshold.
18/11/05 START: 18:50
18/11/05 STOP: 20:45
** Configuration file:
181016_Conf_BrikenFull_2153_test_thr.xlsx
ROOT file:
181105_1850_252Cf_z0cm_2045.root
DLT files:
181105_1850_252Cf_z0cm_133.dlt
181105_1850_252Cf_z0cm_134.dlt
181105_1850_252Cf_z0cm_135.dlt
181105_1850_252Cf_z0cm_136.dlt
Comment:
- Clovers are placed inside the moderator, front face ~5mm from AIDA hole border.
- AIDA not inside the moderator.
- In beam PE shielding placed. |
|
|
410
|
Mon Nov 5 13:43:57 2018 |
FM, PA | Low threshold, 252Cf, z=0cm, Parallel downstream | 252Cf at z=0cm,ie center of moderator, source axis parallel downstream
Low threshold.
18/11/05 START: 22:46
18/11/05 STOP: 00:01
** Configuration file:
181016_Conf_BrikenFull_2153_test_thr.xlsx
ROOT file:
181105_2245_252Cf_z0cm_0001.root
DLT files:
181105_2245_252Cf_z0cm_140.dlt
181105_2245_252Cf_z0cm_141.dlt
181105_2245_252Cf_z0cm_142.dlt
Comment:
- Clovers are placed inside the moderator, front face ~5mm from AIDA hole border.
- AIDA not inside the moderator.
- In beam PE shielding placed. |
|
|
383
|
Wed Oct 24 03:49:01 2018 |
AT & AT | Low threshold, 252Cf, z=0cm | 252Cf at z=10cm, source axis perpendicular to beam axis, typical orientation.
Low threshold.
18/10/24 START: 11:50
18/10/24 STOP: 15:37
** Configuration file:
181016_Conf_BrikenFull_2153_test_thr.xlsx
ROOT file:
181024_1150_252Cf_z10cm_1537.root
DLT files:
181024_1150_252Cf_z10cm_085.dlt
181024_1150_252Cf_z10cm_086.dlt
181024_1150_252Cf_z10cm_087.dlt
181024_1150_252Cf_z10cm_088.dlt
Comment:
- Clovers were placed outside the moderator
- AIDA not inside the moderator.
- Without In beam PE shielding. |
|
|
388
|
Thu Oct 25 00:53:43 2018 |
AT & AT | Low threshold, 252Cf, z=-25cm, Perpendicular 90deg | 252Cf at z=-25cm,ie 25 cm downstream the beam, source axis perpendicular at 90deg with respect to typical
orientation.
Low threshold.
18/10/25 START: 08:55
18/10/25 STOP: 12:05
** Configuration file:
181016_Conf_BrikenFull_2153_test_thr.xlsx
ROOT file:
181025_0854_252Cf_zm25cm_1205.root
DLT files:
181025_0854_252Cf_zm25cm_103.dlt
181025_0854_252Cf_zm25cm_104.dlt
181025_0854_252Cf_zm25cm_105.dlt
Comment:
- Clovers were placed outside the moderator
- AIDA not inside the moderator.
- Without In beam PE shielding. |
|
|
386
|
Wed Oct 24 11:28:42 2018 |
AT & AT | Low threshold, 252Cf, z=-25cm | 252Cf at z=-25cm,ie 25 cm downstream, source axis perpendicular, typical orientation.
Low threshold.
18/10/24 START: 19:31
18/10/25 STOP: 00:01
** Configuration file:
181016_Conf_BrikenFull_2153_test_thr.xlsx
ROOT file:
181024_1930_252Cf_zm25cm_0001.root
DLT files:
181024_1930_252Cf_zm25cm_092.dlt
181024_1930_252Cf_zm25cm_093.dlt
181024_1930_252Cf_zm25cm_094.dlt
181024_1930_252Cf_zm25cm_095.dlt
Comment:
- Clovers were placed outside the moderator
- AIDA not inside the moderator.
- Without In beam PE shielding. |
|